↓ Advertise on Defender2 ↓

Home > Technical > Heads Up:- Air Intake System
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
AndrewS



Member Since: 10 Apr 2007
Location: Hereford
Posts: 3707
United Kingdom 2013 Defender 130 Puma 2.2 SW Rimini Red
Heads Up:- Air Intake System
Check your Box Shocked

The air filter box is not sealed to the air intake pipe that runs from the intake point on the inner wing to the air box. See pictures. So your RAI is a waste of time. I will post more pictures and hopefully a cure later this weekend. Also there does not appear to be a water outlet device from the air box.

FFS Land Rover have you lost the plot Question Evil or Very Mad Twisted Evil Evil or Very Mad


Click image to enlarge

More here
https://www.defender2.net/gallery/thumbnails.php?album=53

Last edited by AndrewS on 25th Apr 2008 10:17pm. Edited 1 time in total
Post #1964 25th Apr 2008 8:50pm
View user's profile Send private message View poster's gallery Reply with quote
mse



Member Since: 06 Apr 2008
Location: UK
Posts: 5035
United Kingdom 2016 Defender 110 Puma 2.2 XS CSW Scotia Grey
Ill try and get a chance to check mine on Sunday.

Looking at the picture it doesnt look like that is even designed to be sealed Mike
Post #1965 25th Apr 2008 9:06pm
View user's profile Send private message View poster's gallery Reply with quote
rmb3218



Member Since: 06 May 2008
Location: yackandandah
Posts: 2
Australia 
I have just fitted a TJM Airtec (Australia) snorkel to my 07 Defender. In the install they get you to remove the intake tube and seal both ends with silicone. There appears to be a water drain point at the intake tube near the guard and there is a hole in the bottom of the air cleaner that I thought was also a drain point. I was not able to completely remove the air cleaner assy, how did you do it?
Post #2033 6th May 2008 11:27am
View user's profile Send private message View poster's gallery Reply with quote
Japseroony



Member Since: 02 Jan 2008
Location: North East England
Posts: 807
England 2016 Defender 110 Puma 2.2 XS CSW Montalcino Red
Re: Heads Up:- Air Intake System
AndrewS wrote:
Check your Box Shocked

The air filter box is not sealed to the air intake pipe that runs from the intake point on the inner wing to the air box. See pictures. So your RAI is a waste of time. I will post more pictures and hopefully a cure later this weekend. Also there does not appear to be a water outlet device from the air box.

FFS Land Rover have you lost the plot Question Evil or Very Mad Twisted Evil Evil or Very Mad



Apparently there is a water outlet at the bottom of the airbox but this needs to be sorted when fitting the RAI.

Last edited by Japseroony on 27th Apr 2009 10:35am. Edited 1 time in total
Post #2035 6th May 2008 12:06pm
View user's profile Send private message View poster's gallery Reply with quote
AndrewS



Member Since: 10 Apr 2007
Location: Hereford
Posts: 3707
United Kingdom 2013 Defender 130 Puma 2.2 SW Rimini Red
Re: Heads Up:- Air Intake System
Japseroony wrote:

Hope its not done tooooooo much damage Question


No damage at all Thumbs Up
Post #2040 6th May 2008 6:09pm
View user's profile Send private message View poster's gallery Reply with quote
Japseroony



Member Since: 02 Jan 2008
Location: North East England
Posts: 807
England 2016 Defender 110 Puma 2.2 XS CSW Montalcino Red
Re: Heads Up:- Air Intake System
AndrewS wrote:
No damage at all Thumbs Up


Last edited by Japseroony on 27th Apr 2009 10:34am. Edited 1 time in total
Post #2050 7th May 2008 9:10am
View user's profile Send private message View poster's gallery Reply with quote
AndrewS



Member Since: 10 Apr 2007
Location: Hereford
Posts: 3707
United Kingdom 2013 Defender 130 Puma 2.2 SW Rimini Red
No my vehicles are not re-mapped
Post #2072 11th May 2008 6:01pm
View user's profile Send private message View poster's gallery Reply with quote
dshickle



Member Since: 09 Oct 2007
Location: Epsom
Posts: 36
2007 Defender 110 Puma 2.4 CSW Galway Green
Hi Andrew,

Any news on a solution.

I have fitted the RAI (thanks to your exellecent pic's, without them I whould have been stuffed).
But natually I'm concerned having seen your pic's.

David Disovery 3 TDV6 SE
Defender 90 XS 2.4
Defender 110 S D250 (MY22)
Post #2080 12th May 2008 4:30pm
View user's profile Send private message View poster's gallery Reply with quote
AndrewS



Member Since: 10 Apr 2007
Location: Hereford
Posts: 3707
United Kingdom 2013 Defender 130 Puma 2.2 SW Rimini Red
Embarassed

When we got into checking out the air intake system we found that the RAI was not completely sealed to the wing, as the wing was deformed.


Click image to enlarge

The area in the pink shows that the RAI was not sealed to the wing whereas the area in the yellow shows a clean area indicating that it was sealed.



So a couple of strips of draft excluder fixed this.



The next unsealed joint was where the ducting that is sealed to the inner wing receives the ducting that runs to the air filter box.


Click image to enlarge

This was sealed internally using a water proof bandage.


Click image to enlarge

The next joint was the ducting that enters the air filter box, this was sealed externally using a waterproof bandage.



I made the water proof bandages using a system I use for fixing Butyl liners for water storage tanks. You can buy similar garden pond repair kits from most garden centres.
Post #2093 13th May 2008 9:26am
View user's profile Send private message View poster's gallery Reply with quote
dshickle



Member Since: 09 Oct 2007
Location: Epsom
Posts: 36
2007 Defender 110 Puma 2.4 CSW Galway Green
Hi Andrew,

Many thanks for this - I will now review my installation.

thanks again for your excellent service! Thumbs Up

David Disovery 3 TDV6 SE
Defender 90 XS 2.4
Defender 110 S D250 (MY22)
Post #2095 13th May 2008 10:16am
View user's profile Send private message View poster's gallery Reply with quote
mse



Member Since: 06 Apr 2008
Location: UK
Posts: 5035
United Kingdom 2016 Defender 110 Puma 2.2 XS CSW Scotia Grey
Whenever i have fitted snorkels I have always used and be taught to use some bonding such as an industrial sealant.

Any reason why this would not be the case? Mike
Post #2098 13th May 2008 3:57pm
View user's profile Send private message View poster's gallery Reply with quote
AndrewS



Member Since: 10 Apr 2007
Location: Hereford
Posts: 3707
United Kingdom 2013 Defender 130 Puma 2.2 SW Rimini Red
mse wrote:
Whenever i have fitted snorkels I have always used and be taught to use some bonding such as an industrial sealant.

Any reason why this would not be the case?


Cant see why not Thumbs Up Use what you are familiar with Thumbs Up
Post #2103 13th May 2008 5:16pm
View user's profile Send private message View poster's gallery Reply with quote
mrwoo



Member Since: 03 Jan 2008
Location: Cheshire
Posts: 286
United Kingdom 2004 Defender 90 Td5 CSW Epsom Green
Its interesting to read this post as recently I have noticed that the air intake noise has become more pronounced, not sure why but seems to be loudest at around 1900rpms
Post #2109 13th May 2008 8:45pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums