DEFENDER2.NET - View topic - 110xs sw add 2nd row interior light

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > 110xs sw add 2nd row interior light

Page 1 of 1

Print this entire topic ·

ronwong

Member Since: 28 Jun 2012
Location: Singapore
Posts: 120

2012 Defender 110 Puma 2.2 SW Orkney Grey

110xs sw add 2nd row interior light

I am trying to add a light to the second row. There is cabin light in the first row and 3rd row but strangely not the 2nd row. What is theasiest way to do this? Can I just tap the cable from the 3rd row light? Is the current sufficient to run 2 lights?

2nd May 2014 4:26pm

VeeTee

Member Since: 06 Mar 2011
Location: Somewhere
Posts: 1512

Yes you can

Additionallly you could change the bulb for LED bulbs, I sourced them on Ebay...

Cheers, Vincent
1959 Polynorm 1/4 Ton Trailer, Olive Drab Green (sold)
1970 M416 Military Trailer (Camping Trailer Conversion), Epsom Green (sold)
1975 Series III 88 V6, Light Green (sadly sold)
1996 Defender 110 CSW 300 Tdi, Epsom Green (sold)
2000 Freelander 1 TD4 3-drs, Silver (sold)
2006 Freelander 1 TD4 5-drs Facelift Automatic, Tonga Green (sold)

MySite

Last edited by VeeTee on 2nd May 2014 4:47pm. Edited 3 times in total

2nd May 2014 4:44pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20454

If you use LED lighting then you can tap in to the original as the power consumption is MUCH lower. Using incandescent bulbs though is a no go.
Look in my gallery under interior lighting and you will see some ideas there.

2nd May 2014 4:45pm

ronwong

Member Since: 28 Jun 2012
Location: Singapore
Posts: 120

I bought the lamp housing/ switch. Its a on off and door mode. So I can just connect parallel by pulling 3 cables from the 3rd row?

The bulb is another thing, in fact I am happy enough with the original bulb

2nd May 2014 4:47pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

custom90steve wrote:
If you use LED lighting then you can tap in to the original as the power consumption is MUCH lower. Using incandescent bulbs though is a no go.

That's not true, Steve. Whilst LED's are very nice, the standard bulbs are still less than 1 amp each and adding a second is well within the capabilities of the wiring. People were doing this sort of mod long before LED's became common. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

2nd May 2014 5:18pm

ronwong

Member Since: 28 Jun 2012
Location: Singapore
Posts: 120

I pulled from the front. Just a cable about 1m for each, the 2nd row light does not dim in door mode with the first and 3rd row and also is much dimmer. Maybe it's bad wiring, I will try to do it again.

3rd May 2014 9:23am

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20454

LRA I didn't know that, if the wiring can take it then all very well. All the same it's not designed to take more.
Or less for that matter but in my case I matched LED consumption pretty closely.

3rd May 2014 10:02am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum