↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > LR Raised Air Intake
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Matthew_Mills



Member Since: 16 Feb 2014
Location: Somerset
Posts: 152
England 
LR Raised Air Intake
Today I fitted a LR RAI...

I know, I paid more than a Mantec would have cost, but I like OEM kit (even if someone else made it...). I prefer the shape and the black upper mount - looks great.

But god I hate drilling holes in my new 100 XS Station Wagon...

Anyway I spent a few hours last night before picking it up trying to find some instructions - to make sure I had all the tools. But even Google let me down and I could not find anything - I assumed the Mantec was similar and borrowed a Viv-Nut setting tool. I needed it as i'm sure most of you know.

So I thought I'd scan and upload in case anyone else needs to find them. There's no copyright so no issue - Unless Martin feels differently - which I totally understand if they are removed but I hope not.

I've also read all of the other - you need to 'seal the internals' posts...

Thus far I did release the torqs and sealed the inter ring element - I'll do the pipes and drain holes etc., at some point too.

Mantec bumper and Zeon 12 next - any guidance on that front?

Matt



Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge


[/img]
Post #310037 20th Feb 2014 8:34pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20497
United Kingdom 
I think it has been known to be possible to bond the A pillar bracket to avoid drilling, at least I think that's what K9F did.
Mind you it has to be a really good bonding agent! No Guts, No Glory.
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪
Post #310038 20th Feb 2014 8:38pm
View user's profile Send private message View poster's gallery Reply with quote
Matthew_Mills



Member Since: 16 Feb 2014
Location: Somerset
Posts: 152
England 
Customer90Steve

Done now... drilled the 'A' post and wing and inserted the RivNuts. I don't plan removing it, so no worries. I did waxoyl all the holes and used a tar based sealant on the gasket which never hardens fully. So hopefully a job done well!

We'll see - annoyingly found 2 chips in the windscreen and 3 on the bonnet already - checker plate maybe!

Matt
Post #310047 20th Feb 2014 8:46pm
View user's profile Send private message View poster's gallery Reply with quote
TJ101



Member Since: 30 May 2007
Location: Taunton Somerset
Posts: 3750
Isle Of Man 2015 Defender 110 Puma 2.2 XS CSW Montalcino Red
Well

I only know one Matt Mills Shocked

Are we taking a 110 or a Trayback ?? California F1, 75th 110 "Kermit", 50th Ann V8, 90 V8 Hybrid, 55 Series 1

Main Brian James Trailer Dealer for South West UK
Post #310075 20th Feb 2014 9:34pm
View user's profile Send private message View poster's gallery Reply with quote
Matthew_Mills



Member Since: 16 Feb 2014
Location: Somerset
Posts: 152
England 
TJ101

Mine is a 110 Station Wagon, previously on this site with a 90 XS SW and before that a 90 TD5...

Not sure we know each other?

Matt
Post #310081 20th Feb 2014 9:47pm
View user's profile Send private message View poster's gallery Reply with quote
TJ101



Member Since: 30 May 2007
Location: Taunton Somerset
Posts: 3750
Isle Of Man 2015 Defender 110 Puma 2.2 XS CSW Montalcino Red
My mistake Matt,, Rolling Eyes

Must be 2 Matt Mills in Somerset then,, thought a new 110 is not the Matt style i know ? more like a bowler or similar

The LR RAI, is made by Mantec,, as is the LR winch bumper,,
I have the same, so the exterior, visually looks as per LR official fitted accessories,, for a reason Whistle California F1, 75th 110 "Kermit", 50th Ann V8, 90 V8 Hybrid, 55 Series 1

Main Brian James Trailer Dealer for South West UK
Post #310092 20th Feb 2014 10:16pm
View user's profile Send private message View poster's gallery Reply with quote
K9F



Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610
United Kingdom 2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey
custom90steve wrote:
I think it has been known to be possible to bond the A pillar bracket to avoid drilling, at least I think that's what K9F did.


I did indeed....Sikaflex was my weapon of choice. Thumbs Up


Click image to enlarge If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!
Post #310095 20th Feb 2014 10:26pm
View user's profile Send private message View poster's gallery Reply with quote
Matthew_Mills



Member Since: 16 Feb 2014
Location: Somerset
Posts: 152
England 
TJ101 wrote:
My mistake Matt,, Rolling Eyes

Must be 2 Matt Mills in Somerset then,, thought a new 110 is not the Matt style i know ? more like a bowler or similar

The LR RAI, is made by Mantec,, as is the LR winch bumper,,
I have the same, so the exterior, visually looks as per LR official fitted accessories,, for a reason Whistle


Great minds!

Yep, but I think the LR version is better in terms of the upper bracket, shape, and the gasket configuration...

As for the bumper - yep knew that, but LR do not have a Zeon version!

Mine arrives in a week or so...

Matt

PS I'd love a bowler! Mt wife would not! Rolling with laughter Rolling with laughter
Post #310098 20th Feb 2014 10:31pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20497
United Kingdom 
Good good, glad you got it protected well, that can be the issue with corrosion. Keep an eye on the bracket too. Other than that it should be trouble free. Wink Any photos fitted? No Guts, No Glory.
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪
Post #310099 20th Feb 2014 10:31pm
View user's profile Send private message View poster's gallery Reply with quote
Matthew_Mills



Member Since: 16 Feb 2014
Location: Somerset
Posts: 152
England 
Pic fitted...



Click image to enlarge


Rear work light and new style under shield... That's all now.

Zeon 12, Bumper, and new Head lights on the way...

What else - Hmmm, let me see?

Matt
Post #310104 20th Feb 2014 10:41pm
View user's profile Send private message View poster's gallery Reply with quote
JWL



Member Since: 26 Oct 2011
Location: Hereford
Posts: 3443
England 2002 Defender 110 Td5 SW Coniston Green
The same instructions are found buried in the public access part of Topix in the accessories part
http://topix.landrover.jlrext.com/topix/vehicle/index?cat=OWNER#

Along with other fitting instructions.
Post #310107 20th Feb 2014 10:56pm
View user's profile Send private message View poster's gallery Reply with quote
Matthew_Mills



Member Since: 16 Feb 2014
Location: Somerset
Posts: 152
England 
JWL

Now that's a revelation I knew nothing about that site - cheers I'll bookmark it!

CHEERS...

Matt

Last edited by Matthew_Mills on 20th Feb 2014 11:19pm. Edited 1 time in total
Post #310109 20th Feb 2014 11:04pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20497
United Kingdom 
Love the 110. Thumbs Up Probably passed you at some point on the roads unless your down in the Deep South. Laughing No Guts, No Glory.
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪
Post #310112 20th Feb 2014 11:19pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums