 | Home > Puma (Tdci) > Roller Drawer system |
 
|
|
|
| steveandlooby Member Since: 07 Nov 2009 Location: Bedfordshire Posts: 35   
|
Hi guys n gals,
Not being any good at DIY and therefore unable to knock up my own I'm looking for a roller drawer system - one thats going to be flexible enough to take in and out rather than something thats permanent. I like the look of this stuff http://www.dolium.com.au/view?command=cman...key=dolium. Two question learned friends'  '1. Anyone got any suggestions/recommendations? 2. Can the Boab drawers be purchased in UK.
regards all Steve |
||
22nd Feb 2010 5:33pm |
|
| alantd Member Since: 14 Dec 2008 Location: Northamptonshire Posts: 1513  
|
The main problem with the drawer systems is the cost.
Second, if you have the rear seats in the Station Wagon, you can't fit a standard drawer in. You could take the seats out, of course, but then you've got to be sure you won't be using them (I often carry more than 5 folks). I think that one you've linked to fits between the seats (if I remember correctly) and it's optimised for the smaller Gommo box but I can't find the original one that I was looking at. The alternative (that's I'll probably end up doing) is making one out of MDF on roller wheels. Someone has already done something similar see here One that started out as a 2.4 TDCi 110 XS + New Defender 110 First Edition |
||
|
23rd Feb 2010 10:09am |
|
| ralton Member Since: 04 Feb 2010 Location: Durban Posts: 153  
|
What do you want to use it for?
I needed "draws" in the back for a "kitchen", so i bought a really cheap 3 draw filing cabinet from an office supplier - with the seats folded up i can get my fridge and "draws" to fit nice and tight (next to each other), thereby using the back of my 90 as my kitchen... Sorry, just rambling... Cheers |
||
|
23rd Feb 2010 11:12am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
