Home > Puma (Tdci) > 90 bulkhead removal bar and factory cargo barrier |
|
|
NickMc Member Since: 01 Oct 2014 Location: Norn Iron Posts: 1634 |
You used to be able to get the td5 one in two pieces for the later CSWs with no bulkhead.
|
||
19th Feb 2015 11:58pm |
|
Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018 |
Taken from here: http://www.lrparts.net/full-length-dog-gua...2007.html# Fitting instructions are here: http://topix.landrover.jlrext.com/topix/co...oupId=1667 Looks like you can fit the lower section on it's own but will leave some tabs/brackets sticking up. |
||
20th Feb 2015 11:06am |
|
peterl Member Since: 08 Jan 2009 Location: Pembrokeshire Posts: 308 |
That's the one, thanks.
Will now see if I can find a second hand one or find a fabricator to make something similar up for the bottom half only. Pete |
||
20th Feb 2015 12:15pm |
|
Mdm Member Since: 11 Sep 2013 Location: Sunny Lancashire Posts: 1631 |
They are made by travall for lr I beilve
|
||
20th Feb 2015 7:09pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis