Can't get my defender started after doing a head gasket
Hi
I have just had to do a head gasket on my 2,4 tdci, can't seem to get it started
I have checked the timing all look good
The only thing I forgot to do was mark the injector from which the cylinder they came from
Any other idea ????
cheers
31st May 2014 10:19am
Laurie
Member Since: 22 Feb 2008
Location: Sussex, England
Posts: 2897
Is it pumping white smoke while you're cranking it?
If you've got fuel going to the injectors it should be.
31st May 2014 10:25am
munch90
Member Since: 26 Oct 2013
Location: guildford
Posts: 3558
should still start with mixed injectors , are cam and crank sensors plugged in ? (crank one down the back and easy to forget )
have you got diesel up to injectors or does it need bleeding ?
did you use proper pins for locking cams and crank for re-timing ?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
31st May 2014 10:25am
