![]() | Home > In Car Electronics > Radio signal/interferance |
![]() ![]() |
|
|
custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20612 ![]() ![]() |
I'd check all connections, if it still does it then try replacing it.
![]() β½οΈπ’οΈβοΈπ§°πͺ |
||
![]() |
|
excossack Member Since: 22 Feb 2012 Location: North West Posts: 5884 ![]() ![]() ![]() |
Cheers will give it a look over. 1999 Defender TD5 110
Regards John M0VAZ Econet Station 48 no clock |
||
![]() |
|
custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20612 ![]() ![]() |
Good luck.
![]() β½οΈπ’οΈβοΈπ§°πͺ |
||
![]() |
|
wyvern Member Since: 13 Dec 2009 Location: Cornwall Posts: 2118 ![]() ![]() ![]() |
Have the same problem with my TDCI at the mo - the original arial became rusty so have tried to repaced it with a few new ones but all of them have had some interferance and poor reception.
I've gone so far as buying an actual landorver one recently and although better - still not as good as the first one! I've even ran cables up from the chassis to 'ground' the base but that was not a sucess at all - made it worse any ideas? Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html Elgar -TDCI(Puma) 110XS Dormobile - now sold Devon & Cornwall 4x4 Response - DC126 ![]() |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)