DEFENDER2.NET - View topic - Seized ABS sensor removal

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Seized ABS sensor removal

Page 1 of 1

Print this entire topic ·

Lancerdoc999

Member Since: 10 Apr 2016
Location: South Wales
Posts: 205

Seized ABS sensor removal

I am stripping my Defender 2000 Salisbury rear axle for cleaning and swap to new chassis and am trying to remove the ABS sensors. Both sensors are properly seized into the end of the axle casing. The little copper bushes are in there somewhere!

Can I use a bit of wood on the outer part of the sensor and "whack" it out or will this damage it? I don't want to have to buy a new set due to cost if can help it. Is there another way of doing this. Grabbing the rear portion and wiggling it out probably won't work.

Thanks for advice

15th Aug 2018 8:16pm

Lancerdoc999

Member Since: 10 Apr 2016
Location: South Wales
Posts: 205

bump

16th Aug 2018 6:15am

4RF RDS

Member Since: 19 Jul 2015
Location: Ottawa
Posts: 933

2000 Defender 110 Td5 XS CSW Epsom Green

Just get a pry bar and put it under the lip and lever it out. If that does not work vice grips and twist it out. If you damage it, replace it. 2010 Range Rover MkIII Autobiography Super Charged (Idris)
2003 Range Rover Mk III (Desmond FitzWilliam)
2000 Defender 110 CSW TD5 (CTX)
1992 Range Rover Classic (Lizzy)
1972 Series III 300 Tdi (Stanwood)
1967 MGB GT

Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.
H. L. Mencken (1880 - 1956)

26th Aug 2018 4:38pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum