![]() | Home > My Defender > What Did You Do In Your Defender Today |
![]() ![]() |
|
|
AndyTunn Member Since: 10 Jan 2015 Location: Auckland Posts: 313 ![]() ![]() ![]() |
I knew someone would leap on that one! ![]() |
||
![]() |
|
ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637 ![]() ![]() ![]() |
Changed the half shafts and driven flanges on my 110.
New gaskets, flanges, half shafts, bolts and rubber caps. No longer goes clunk clunk when moving up gears, and also no more low speed kangaroo diesel when going over a wee bump or turning a corner in wrong gear ![]() Am a happy bunny ![]() |
||
![]() |
|
excossack Member Since: 22 Feb 2012 Location: North West Posts: 5938 ![]() ![]() ![]() |
Saturday gave the 110 a wash and cleaned the alloys which where thick with brake dust, the wheels are now shiney again. Must get some decent alloy wheel cleaner.
Sunday went to the Gareth Hall Rally at the Ranges in Trawsfnydd. A quiet day with just two recoveries to do. Mk2 Escort which needed a front suspended lift and another car that needed just a straight tow. 1999 Defender TD5 110 Regards John M0VAZ Econet Station 48 no clock |
||
![]() |
|
YOLO110 Member Since: 14 Feb 2015 Location: Perth Oz and Stansted UK Posts: 1647 ![]() ![]() |
Hot soapy water is best mate!
Alloy wheel (acid) cleaners gradually eat into the protective coatings on the alloy and after a while it make it increasingly harder to get them clean ![]() |
||
![]() |
|
GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10383 ![]() ![]() |
I don't suppose you are doing Mull this year? |
||
![]() |
|
DOOFER Member Since: 07 Oct 2012 Location: Suffolk Posts: 412 ![]() |
i always use alloy wheel sealr to, makes them so much easier to clean DON'T PANIC |
||
![]() |
|
custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20746 ![]() ![]() |
Goodies arrived.
![]() ![]() Click image to enlarge |
||
![]() |
|
excossack Member Since: 22 Feb 2012 Location: North West Posts: 5938 ![]() ![]() ![]() |
It was mentioned by another crew, but no plans of my own. Its on my list of events to do. Are you going? 1999 Defender TD5 110 Regards John M0VAZ Econet Station 48 no clock |
||
![]() |
|
excossack Member Since: 22 Feb 2012 Location: North West Posts: 5938 ![]() ![]() ![]() |
Alloy wheel sealer...Mmm..Off to look for some. If it makes life easier then sounds a bonus to me. 1999 Defender TD5 110 Regards John M0VAZ Econet Station 48 no clock |
||
![]() |
|
GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10383 ![]() ![]() |
Yeah, we are making the trip up there, been on my list for years !!
|
||
![]() |
|
excossack Member Since: 22 Feb 2012 Location: North West Posts: 5938 ![]() ![]() ![]() |
Have fun. Its been on my list for a while now. If I want to go next year I need to book a hotel now! 1999 Defender TD5 110
Regards John M0VAZ Econet Station 48 no clock |
||
![]() |
|
DOOFER Member Since: 07 Oct 2012 Location: Suffolk Posts: 412 ![]() |
i know autoglym sell it, but i'm sure others make it too DON'T PANIC |
||
![]() |
|
gilarion Member Since: 05 Dec 2013 Location: Wales Posts: 5117 ![]() ![]() ![]() |
If using Autoglym wheel seal make sure you do not spray any of it onto your brakes...same goes for any other make Personally I find Meguiars Car Alloy Wheel Brake Dust Barrier Spray Sealant to be a better product than Autoglym's. Though if you want the best and can find it then use Collinite Insulator Wax brilliant stuff. For those who like Welsh Mountains and narrow boats have a look at my videos and photos at.. http://www.youtube.com/user/conwy1 |
||
![]() |
|
Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6678 ![]() ![]() |
Actually tomorrow (will be out all day so unable to update) I'm off to JE Engineering to have the 6 pot calipers fitted to our red 'Bowler' 90 and to collect our JE Liberator that has had been serviced, new Fox Racing suspension, Stainless exhaust, electronic handbrake and JE Type-D 18"alloys shod with the new BFG AT's and a Startech steering wheel
![]() |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
