 | Home > My Defender > What Did You Do In Your Defender Today |
 
|
|
|
| JWL Member Since: 26 Oct 2011 Location: Hereford Posts: 3443   
|
Thankfully it was only a short trip, too much hassle to get the trailer out for the one box. I've got some more changes to come, hopefully subtle and tasteful without costing a fortune.
|
||
15th May 2014 4:57pm |
|
| GUM97 Member Since: 05 Feb 2012 Location: Cheshire Posts: 3555  
|
JWL-That looks really good, I like it!
Stu-Shouldn't they have picked that up on service?  An engine to TDi for!
"Land Rover- Proudly turning drivers into mechanics since 1948"  |
||
|
15th May 2014 7:24pm |
|
| landy andy Member Since: 15 Feb 2009 Location: Ware, Herts Posts: 5741 
|
Dug the trailer out the garage
Click image to enlarge |
||
|
15th May 2014 7:56pm |
|
| Stuarta Member Since: 11 Apr 2014 Location: Shrivenham Posts: 38
|
that's a smart setup! |
||
|
15th May 2014 7:58pm |
|
| jimbob7 Member Since: 06 Jul 2013 Location: uk Posts: 2055 |
Past few days I've fitted Wipac Crystals,stainless bezels,Osram Nightbreakers (90%) and today I fitted the Land Reiziger upgraded headlamp loom,pics to follow. Pov.spec,ftw. 2006, 110,TD5.
|
||
|
15th May 2014 8:39pm |
|
| Defender-Stu Member Since: 14 Jun 2012 Location: South West England Posts: 1320
|
Yeah my mate at Steve Hill Land Rovers did tell me but we wiped it down and I drove it today and we were 100% right so don't know weather top get it done now but not sure if they will change the clutch as well as im not paying a penny and don't want them to rip it apart and put back a clutch that could be contaminated so to speak  |
||
|
15th May 2014 8:56pm |
|
| Zouritte Member Since: 29 Jan 2014 Location: Ain Posts: 69  
|
got myself a little ride over someone's back.... antitheft wouldn't let me start...
Click image to enlarge |
||
|
16th May 2014 8:45am |
|
| SailingTom Member Since: 19 Nov 2013 Location: ESSEX Posts: 1722
|
/\ Oh Dear
Had a go Altering a grp snow-vent for mine today. First off cut the front out as thought that might be better, but didnt like the look as hid the wing to much so added another layer of grp and cut it right down. Still works for keeping the snow off along with keeping the wing shape and letting a bit more air in. Just got to finish it off then off to the painter with some other bits
Click image to enlarge Defender puma dormobile camper |
||
|
16th May 2014 11:05am |
|
| shaggydog Member Since: 12 Aug 2012 Location: Kent Posts: 3347 
|
That looks sharp o.O
|
||
|
16th May 2014 12:39pm |
|
| SailingTom Member Since: 19 Nov 2013 Location: ESSEX Posts: 1722
|
It did at that stage yes, all rounded off now and mainly above the wing
Defender puma dormobile camper |
||
|
16th May 2014 12:45pm |
|
| shaggydog Member Since: 12 Aug 2012 Location: Kent Posts: 3347
|
Awesome
|
||
|
16th May 2014 12:46pm |
|
| munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558
|
started to change rear brake caliper pistons to stainless and found I got wrong size pistons bl@@dy tw@t , now got to put it back togather with old ones
|
||
|
16th May 2014 3:22pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20488
|
Munch, I had a similar issue but wire rear lights, took off olds ones and cleaned in advance of new ones turning up.
New ones arrived and then they weren't the correct type I wanted so had to fit the original light again!  |
||
|
16th May 2014 4:07pm |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 
|
Picked up a set of 5 new boosts and contis ready for the summer holiday run into Europe (MTR's tend to howl at 140kmh)
few other bits arrived in the week, going to be busy this w/e |
||
|
16th May 2014 5:15pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
