 | Home > Off Topic > Topix access |
 
|
|
|
| Naks Member Since: 27 Jan 2009 Location: Stellenbosch, ZA Posts: 2635   
|
SSM46477
From http://www.freel2.com/forum/post131178.html: Reference: SSM46477 Date: 25-Nov-2010 Issue: Excessive rumble/humming noise or high pitched whine coming form the rear of the vehicle Cause: Root cause, Pinion Tail Bearing spalling caused by subsurface material deformation. Cause of subsurface deformation is static overload. Action: For reported concerns where LTB00342 (Rear Differential Lower Level Repair) has been carried out or if a Rear differential is replaced, please be aware that a software update has been made available to help prevent premature pinion bearing failure in the future. This update should only be applied to the Haldex Coupling control module if the lower level pinion bearing repair has been carried out or if the rear differential assembly has been replaced. Note ! This software is only available for Generation 4 Haldex couplings which were fitted from Start of 2009 MY vehicle manufacture. A number of Vehicles built before 2009MY originally fitted with a Generation 3 coupling, may have since been fitted with a Generation 4 coupling during service repair and could also have this software update applied if required. LTB00342v2 And http://www.freel2.com/gallery/albums/userpics/11383/LTB00342.pdf -- 2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear 2015 Range Rover Sport V8 Supercharged 
Defender Puma Workshop Manual: https://bit.ly/2zZ1en9 Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ |
||
7th May 2013 12:44pm |
|
| bvandyk Member Since: 03 Sep 2012 Location: South Africa Posts: 49 |
Thank you very much!!
|
||
|
7th May 2013 12:56pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
