 | Home > Puma (Tdci) > TDV8 ? |
 
|
|
|
| Dieselhead Member Since: 21 Oct 2012 Location: Pulborough. West Sussex Posts: 552  |
Ask J E Engineering
They will know what to do  Chris
2008 XS 110 2.4 Utility. Tonga Green 1953 Series 1 for restoration 1983 Mini Mayfair 2004 VW T5 Camper 2008 Diahatsu Sirion. Thats hers Classic Bolens Garden Tractors |
||
21st Apr 2013 7:06pm |
|
| Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6298  
|
I'd have thought Pete / BAS would be the guy to ask - after all he's tried / done the V6?
|
||
|
21st Apr 2013 7:08pm |
|
| kingofthesparks Member Since: 06 Jan 2011 Location: Very close to Watford gap services , northants Posts: 987  
|
Was planning on doing it myself, wanted to know if anyone here had done it and any major issues
|
||
|
21st Apr 2013 7:08pm |
|
| big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456 
|
Not unless you have a custom chassis Pete has done this but again there is big money in getting it to run and things to all mount together its just to big really
 2015 2.2 tdci hardtop xs
3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
|
21st Apr 2013 7:09pm |
|
| kingofthesparks Member Since: 06 Jan 2011 Location: Very close to Watford gap services , northants Posts: 987
|
Pete would be doing the electrical side
Changing chassis is not an issue, was looking to lengthen wings and bonnet by 210mm Last edited by kingofthesparks on 21st Apr 2013 7:11pm. Edited 1 time in total |
||
|
21st Apr 2013 7:09pm |
|
| big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456
|
Haha hope you have a huge cheque book then I doubt you would see change from 10k for wireing
Steve 2015 2.2 tdci hardtop xs 3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
|
21st Apr 2013 7:10pm |
|
| kingofthesparks Member Since: 06 Jan 2011 Location: Very close to Watford gap services , northants Posts: 987
|
Was thinking that cost maybe more than that
|
||
|
21st Apr 2013 7:11pm |
|
| big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456
|
I would speak to him I know I talked with hm abt a tdv8 only a cpl of weeks ago and he basically said he's to busy and its to big
Steve 2015 2.2 tdci hardtop xs 3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
|
21st Apr 2013 7:14pm |
|
| adafish Member Since: 30 Mar 2009 Location: atherstone Posts: 1384 
|
you'll need plenty of scotch locks and insulation tape.....
 Putting Dreams on Drives at JLR Solihull.. |
||
|
21st Apr 2013 7:14pm |
|
| kingofthesparks Member Since: 06 Jan 2011 Location: Very close to Watford gap services , northants Posts: 987
|
Sent him a pm, I'm not in a rush |
||
|
21st Apr 2013 7:16pm |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101 
|
tdv8s wide not long.
my dream engine ....with an auto |
||
|
21st Apr 2013 7:23pm |
|
| kingofthesparks Member Since: 06 Jan 2011 Location: Very close to Watford gap services , northants Posts: 987
|
But there is all that space where the wings are
If its a no go how much is the engine and box worth ? May just stick them on the bay. |
||
|
21st Apr 2013 7:24pm |
|
| Porny Site Sponsor Member Since: 31 Aug 2009 Location: Sutton Coldfield - West Midlands Posts: 809 
|
3.6 tdv8 or the new 4.4 tdv8.
Both would be relatively straight forward to get running... And not on some outdated aftermarket ecu system that wouldn't even use on my lawn mower. Apart from the cost of the ecu solution, the other big cost is a gearbox to hold onto it.... Manual you have a few options starting from £6000 + vat to about £20,000. Or we could get the 6 speed or 8 speed gearbox working properly in a Defender
Ian IRB The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers. www.IRBdevelopments.com www.facebook.com/irbdevelopments www.integrated316.com www.facebook.com/integrated316 |
||
|
21st Apr 2013 10:05pm |
|
| kingofthesparks Member Since: 06 Jan 2011 Location: Very close to Watford gap services , northants Posts: 987
|
4.4 ltr with 8 speed auto, if I got the engineering side sorted do you have an approx cost for the electrical side
|
||
|
22nd Apr 2013 5:02am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
