Home > Maintenance & Modifications > Budget bridge winch to fit in Mantec Defender bumper tray |
|
|
BigWheels Member Since: 21 Mar 2010 Location: Somerset Posts: 1405 |
I now have a Mantec winch bumper , the 5-WB that allows me to use my rubber A bar & keep the a/c clear. http://www.mantec.co.uk/productdetail.cfm?...D0F12999FB
http://www.mantec.co.uk/images/products/fu...0A-BAr.jpg Will any other, cheaper, bridge winches fit as the Warn show does?[/img] Land Rover Defenders. 67 years heritage, minimal appearance changes, still going strong all over the world. Not a fashion vehicle, but fashionable to own. Made for the needy, not the greedy. Ta ta Defender |
||
4th Jun 2012 7:56pm |
|
excossack Member Since: 22 Feb 2012 Location: North West Posts: 5857 |
Maybe something from the David Bowyer / Goodwinch collection might? http://www.dborc.co.uk/goodwinch/ 1999 Defender TD5 110
Regards John M0VAZ Econet Station 48 no clock |
||
4th Jun 2012 9:16pm |
|
excossack Member Since: 22 Feb 2012 Location: North West Posts: 5857 |
My plate is attached to the top of the A bar 1999 Defender TD5 110
Regards John M0VAZ Econet Station 48 no clock |
||
5th Jun 2012 8:02am |
|
noworries4x4 Member Since: 24 Dec 2010 Location: Newton Abbot Devon Posts: 1195 |
The GL5 bridge winch does not fit where a Warn once was, it does physicaly but only just but you will need to re-cut and then weld up the fairlead hole as it is more centraly located and re-drill the base plate, just had to do it tryed to up load pictures for my Ladybird thread but my gallery is full at the moment If everything is under control you are not going fast enough.
Every Day 16 MY Discovery 4 Commercial Workshop and Escort Vehicle Weekends 07MY L322 TDV8 Vogue SE Series 1 80" 3ltr 6cyl with overdrive No Worries 4X4 |
||
5th Jun 2012 10:41am |
|
big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456 |
Good winch tds 9.5 about 450 Ish 2015 2.2 tdci hardtop xs
3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
5th Jun 2012 10:52am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis