DEFENDER2.NET - View topic - Replacing a wing mirror

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Replacing a wing mirror

Page 1 of 1

Print this entire topic ·

hopeydaze

Member Since: 11 May 2011
Location: Bath
Posts: 30

Replacing a wing mirror

I need to replace a wing mirror. The entire mirror and arm broke off in a low speed roll on black ice. It's about the only damage apart from a few minor dents

I will order the morror and arm from one of th usual supects but can anyone tell me if there is anything else I need.

Also any advice on what tools I need would be apprecaited as I do not have the Land Rover with me.

Thanks

31st Jan 2012 4:14pm

Paul_1978

Member Since: 08 Nov 2009
Location: South Yorkshire
Posts: 384

You have to undo the hinge bolts to remove / refit the mirror.
A new mirror comes complete with arm and glass, you will just need the two screws which hold it on if you no longer have them or the threads are knacked.

Its not a hard job.

31st Jan 2012 4:31pm

Merlin

Member Since: 30 Oct 2010
Location: Newmarket
Posts: 981

Don’t forget to support the door when you take out the hinge bolts, or the door will drop. Put an jack under it, or similar, and give it a bit of lift when putting the bolts back. Or get the wife to hold it up ( oh you’re naughty!).

Merlin

31st Jan 2012 4:42pm

Zagato
Site Supporter

Member Since: 08 Jan 2011
Location: Billingshurst West Sussex
Posts: 5013

"a low speed roll on black ice"

You were lucky, Defenders don't usually like being rolled

31st Jan 2012 6:01pm

RRUK
Site Supporter

Member Since: 31 Mar 2010
Location: Leicestershire
Posts: 2025

I remember doing this on my Series 3.

You simply buy a new wing mirror complete (cheap)

Unscrew the top hinge bolts that hold it to the bulkhead. The wing mirror screws in from the back of the hinge. 2016 D4 HSE

1998 110 TUM HS FFR Hard Top XD WOLF

1982 Series 3 SWB Petrol

31st Jan 2012 8:31pm

Eduardo

Member Since: 28 Aug 2008
Location: RegiÃ³n Metropolitana
Posts: 2110

2007 Defender 110 Puma 2.4 SW Stornoway Grey

Hopeydaze

I replace my mirrors for extended ones one year ago and is very easy (1 hr or less of work).
Maybe the more complicated task is take out the door trim panel.

1.- Take out the door trim panel to have access to the hinge nuts.
Take out first the screw located at the door latch to take out the plastic cover behind the latchcover, then the plastic piece that cover the lock and carefully with a screw driver release all the plastic screws that attahch the trim to the door.

2.- Take out the bolts an nut and be carerefully to support the door

3.- Install the mirror assy.

4.- Put the door trim panel again

Cheers Eduardo

MY 2007 110 SW PUMA 2.4: Big Fog of 64'
MY 1994 Jayco 1207 Folding camper: "El Tremendo"

Click image to enlarge

31st Jan 2012 9:38pm

hopeydaze

Member Since: 11 May 2011
Location: Bath
Posts: 30

Thanks everyone, sounds simple enough. I have done it before on my Series 2 but that was easy as there's no trim panel and the hinge is held by a Philips screw on the outside and a 7/16th nut on the inside.

Zagato, you asked about the roll on black ice. It was on a country lane and my son was driving. he said he was going slowly. Anyway the nearside hit the bank and it bounced back and rolled onto the drivers side. He climbed out of the passenger window. Good job it has wind up windows I guess.

It's now a cat D writeoff and Aviva were fast, fair and good to deal with. I was very impressed.

1st Feb 2012 1:10pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum