| Author |
Message |
 Tracking sorted, but still pulling to the left |
phillips321
 14th Oct 2024 7:45am
|
Forum: Technical · Replies: 13 · Views: 1098 · Subject: Re: Tracking sorted, but still pulling to the left |
Is it under load or braking it's most noticeable, or does it follow camber or poor road surfaces?
What Chris said and the bold bit. ?
Yes defo this. |
| Tracking sorted, but still pulling to the left |
phillips321
14th Oct 2024 7:44am
|
Forum: Technical · Replies: 13 · Views: 1098 · Subject: Tracking sorted, but still pulling to the left |
Is it under load or braking it's most noticeable, or does it follow camber or poor road surfaces?
Yes 100% more noticeable when accelerating or braking and on poor road surfaces: |
| Tracking sorted, but still pulling to the left |
phillips321
11th Oct 2024 4:12pm
|
Forum: Technical · Replies: 13 · Views: 1098 · Subject: Tracking sorted, but still pulling to the left |
Mine used to do that, turns out the top mount bearing had failed.
How can I check this top swivel pin bearing? When hacked up and on axle stands the wheel/steering feels solid. |
| Tracking sorted, but still pulling to the left |
phillips321
20th Sep 2024 3:33pm
|
Forum: Technical · Replies: 13 · Views: 1098 · Subject: Tracking sorted, but still pulling to the left |
Hi all,
My defender tracking was sorted but it still pulls to the left.
My wheel bearings are good.
How do I check my radius arm bushes?
Kind regards |
| Changed transfer box to 1.2 and cruise control doesn’t wor |
phillips321
13th Jul 2024 6:06pm
|
Forum: Td5 · Replies: 14 · Views: 1276 · Subject: Changed transfer box to 1.2 and cruise control doesn’t wor |
The speedo read accurately and I didn't want to change that so I installed the unit between the instrument cluster and the ECU near to the main black ECU plug. In this case the red cable on the Sp ... |
| Changed transfer box to 1.2 and cruise control doesn’t wor |
phillips321
13th Jul 2024 6:05pm
|
Forum: Td5 · Replies: 14 · Views: 1276 · Subject: Changed transfer box to 1.2 and cruise control doesn’t wor |
| Thanks for this. |
| Changed transfer box to 1.2 and cruise control doesn’t wor |
phillips321
13th Jul 2024 1:28pm
|
Forum: Td5 · Replies: 14 · Views: 1276 · Subject: Changed transfer box to 1.2 and cruise control doesn’t wor |
Been quoted £130+VAT For the ECU mod but I can get a speedo healer for £85ish
If I go the healer route I assume I put it between speedo and ECU? If so I’ll mount it behind the speedo cluster. A ... |
| Changed transfer box to 1.2 and cruise control doesn’t wor |
phillips321
12th Jul 2024 7:33pm
|
Forum: Td5 · Replies: 14 · Views: 1276 · Subject: Changed transfer box to 1.2 and cruise control doesn’t wor |
Hi guys,
I’ve made the cruise control mod a few years ago to my TD5. It worked lovely until I changed my transfer box to a 1.2 ratio. My Speedo still reads correct but the cruise control doesn’ ... |
| TD5 2005 blower fan |
phillips321
17th Jun 2024 4:37pm
|
Forum: Td5 · Replies: 1 · Views: 453 · Subject: TD5 2005 blower fan |
Hi there.
My blower motor is on the way out in my 2005td5. If I remove the heater matrix is the motor a replaceable item?
Does anyone have a link to the correct motor I need to use so that whe ... |
| Clutch sticking at lowest position |
phillips321
14th Feb 2024 1:55pm
|
Forum: Td5 · Replies: 11 · Views: 1750 · Subject: Clutch sticking at lowest position |
| Normally the nuts wouldn't squeeze the bit attached to the pedal, there would be a millimetre or 2 'free play'. That inch or so of no resistance will not be eliminated by adjusting the pedal relative ... |
| Clutch sticking at lowest position |
phillips321
14th Feb 2024 1:53pm
|
Forum: Td5 · Replies: 11 · Views: 1750 · Subject: Clutch sticking at lowest position |
I've not made any changes but have gone through lots of deep water recently....
The "free play" at the top of the travel is still strong but looser if that makes sense. My pedal is also h ... |
| Clutch sticking at lowest position |
phillips321
14th Feb 2024 1:09pm
|
Forum: Td5 · Replies: 11 · Views: 1750 · Subject: Clutch sticking at lowest position |
| The distance between the nuts? Currently the nuts are compressing the bit in the middle and couldn’t possibly go any tighter. Do you mean the distance where the centre of the nuts lies on the rod re ... |
| Clutch sticking at lowest position |
phillips321
14th Feb 2024 12:32pm
|
Forum: Td5 · Replies: 11 · Views: 1750 · Subject: Clutch sticking at lowest position |
| Does the inch or so free play in the pedal potentially mean air in the line and would benefit from reverse bleeding? |
| Clutch sticking at lowest position |
phillips321
14th Feb 2024 9:43am
|
Forum: Td5 · Replies: 11 · Views: 1750 · Subject: Clutch sticking at lowest position |
Hi all,
My Defender TD5 has an issue where if I press the clutch all the way to the floor it sometimes sticks there. It's almost as though the LOF clutch spring doesn't doo anything at this bottom ... |
| 110 DCPU - diesel heater in rear, pipe work to front...? |
phillips321
4th Dec 2023 4:22pm
|
Forum: In Car Electronics · Replies: 9 · Views: 1124 · Subject: 110 DCPU - diesel heater in rear, pipe work to front...? |
| Thanks |
| |
