DEFENDER2.NET - View topic - Rubbish at electrics, reverse light upgrade, soldering ... ?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Modifications & Maintenance (L663) > Rubbish at electrics, reverse light upgrade, soldering ... ?

Page 1 of 1

Print this entire topic ·

Harty

Member Since: 20 Feb 2021
Location: London
Posts: 30

Rubbish at electrics, reverse light upgrade, soldering ... ?

Hi all,

Not going to hide it - I'm rubbish at electrics and have never tried any work on a car before. I've purchased the reverse light upgrade from PowerfulUK and have watched Simon's instruction video. Couple of questions though :

1. If car is off, is that enough for me not to get electrocuted when connecting the electric wires, per the video ?
2. Do I need to solder the wires, as Simon does, or can I just twist them together and cover with electrical insulation tape ?

Thanks,

Harty

18th Jun 2023 8:22am

haymeister

Member Since: 24 May 2021
Location: Saitama
Posts: 266

I have these installed.

1. You'll be fine with the car off.
2. I soldered mine and covered them with electrical tape. I know some others just twisted their wires. I've not had issues over the past 9 months, pressure wash withstanding.

Pulling apart from the panels do take a bit of courage and effort. 22MY Defender 110 D300 S in Pangea Green and Contrast White Roof
IG defender_japan "Hulk san"

18th Jun 2023 9:13am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17441

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

"Just twisting wires together" is appallingly bad practice and a recipe for trouble later on. No-one in their right mind would recommend it.

18th Jun 2023 9:41am

Harty

Member Since: 20 Feb 2021
Location: London
Posts: 30

Thanks for the replies both, really appreciate that.

Off to buy a soldering iron ...

18th Jun 2023 9:57am

AmL

Member Since: 22 Jan 2016
Location: Devon
Posts: 30

Better using something like this, no experience required.

https://www.amazon.co.uk/electrapick-Conne...6&th=1

18th Jun 2023 10:05am

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3677

What Blackwolf said. Additionally, You’ve just spent a fortune on a new motor, don’t cheap out doing a pretty basic job. If you aren’t confident doing electrical work then pay an hours labour to someone that is. If you lived a bit nearer I’d have told you to pop round!

18th Jun 2023 11:06am

TexasRover

Member Since: 24 Nov 2022
Location: Paris
Posts: 1081

2002 Defender 110 Td5 DCPU Chawton White

blackwolf wrote:
"Just twisting wires together" is appallingly bad practice and a recipe for trouble later on. No-one in their right mind would recommend it.

Messing up wiring on a car should be crime, premeditated in fact if you plan to sell the car in 3 years.

18th Jun 2023 11:12am

Nuclear Nick

Member Since: 21 Aug 2021
Location: Southwest
Posts: 284

AmL wrote:
Better using something like this, no experience required.

https://www.amazon.co.uk/electrapick-Conne...6&th=1

Not seen these before but they look a really good idea. I’ll be giving these a try.

18th Jun 2023 4:58pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum