DEFENDER2.NET - View topic - Another Double Din Thread

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Another Double Din Thread - apologies

Page 1 of 1

Print this entire topic ·

Furball

Member Since: 31 Jan 2016
Location: Wiltshire
Posts: 38

2015 Defender 90 Puma 2.2 XS CSW Corris Grey

Another Double Din Thread - apologies

Hi all, I've been looking for a double din change for a whilst, for my Puma dash.
It currently has one, but the quality is rubbish - fits badly, finish is coming off already etc. Can anyone recommend a good quality one where;
- gaps are even...edge on the top follows the angle of the dash (not 2 mm one end then 8mm the other - slight exaggeration but you get the idea)
- gloss black/Santorini
- preferably comes with a 7 switch with no round hole
- one whole piece that includes the vents and clock
- don't care if the vents move, but would prefer it they don't
Thanks in advance! 😀 and if you have photos it would be appreciated.

17th May 2023 1:59pm

Stacey007

Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3757

I've had the dual system where the top is separate from the bottom.

Changed to a single piece (ebay) but wasn't keen on finish.

Swapped for a Urban part a few years ago (all one piece with vents)

It still imho does not fit correctly, I've tried heating the vents behind and even cutting a bit off...

Pretty sure in the main its the head unit, I have a double din pioneer and its big, it also has a camera, 3 sets of RCA lead, a USB lead and dab Aerial and a mic coming out of the back. There is simply no room for it all.

I've took it apart I don't know how many time to get it better but its still not right. Its better and OK. Anyone jumping in car probably would not notice, but I do....

Basically where the yellow circles are is not 100% flush and I cannot move it back any further.

Click image to enlarge

17th May 2023 2:17pm

Furball

Member Since: 31 Jan 2016
Location: Wiltshire
Posts: 38

Thanks for the info. Same area I have problems with (yellow circles).
Difficult buying from the internet when the photos are small and you don't how good they would be. Not sure why the manufactures don't take a standard one, 3D scan it in, then modify it with a bigger hole/...unless the standard one doesn't fit that well.

17th May 2023 2:25pm

andy2111

Member Since: 17 Oct 2021
Location: Kent
Posts: 365

I bought mine from mudstuff.. Good quality and no problems

There is info on their website... You need to ensure your head unit isn't too deep to get a proper fit. Look at their fitting instructions for info.. TD5 hardtop to Puma inspired Poptop - my build thread

2002 110 TD5 Hardtop ¦ Full Puma interior ¦ Carpathian grey / Santorini black ¦ X-Vision-X poptop

17th May 2023 4:52pm

Furball

Member Since: 31 Jan 2016
Location: Wiltshire
Posts: 38

Thanks Andy. If you get a few mins, please could you upload a photo of the horizontal bit on the sides as per Stacey007’s photo highlighted with yellow ellipse. TIA

I was leaning towards Mud Stuff’s one….

17th May 2023 5:11pm

andy2111

Member Since: 17 Oct 2021
Location: Kent
Posts: 365

Will do but might be towards the end of next week.. My truck is currently receiving some GTB450 goodness from the chaps at Alive

TD5 hardtop to Puma inspired Poptop - my build thread

2002 110 TD5 Hardtop ¦ Full Puma interior ¦ Carpathian grey / Santorini black ¦ X-Vision-X poptop

17th May 2023 5:18pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum