↓ Advertise on Defender2 ↓

Home > Technical > Corrosion treatment
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Landowner



Member Since: 06 Jan 2023
Location: Somerset
Posts: 66
United Kingdom 2012 Defender 90 Puma 2.2 HT Keswick Green
Corrosion treatment
I’m after a bit of advice. I have corrosion on the A pillar/window frame, no doubt caused when the previous owner fitted the snorkel. I’m taking the snorkel off and want to treat the corrosion but will it be a simple matter of rub it all down, prime and spray? Or is there any other treatment that I should do to stop reoccurrence. I assume the frame is alloy?
Thanks


Click image to enlarge
Post #991734 7th May 2023 6:54am
View user's profile Send private message View poster's gallery Reply with quote
TexasRover



Member Since: 24 Nov 2022
Location: Paris
Posts: 1042
France 2002 Defender 110 Td5 DCPU Chawton White
You will need an acid primer for aluminium. Also since the rust starts where the holes are drilled, refit with some grease and a rubber gasket

Last edited by TexasRover on 7th May 2023 8:59am. Edited 1 time in total
Post #991736 7th May 2023 7:02am
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3414
Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
Is the snorkel bracket stainless steel? Get that isolated (electrically), so use a rubber or plastic gasket between the bracket and the frame, and use Duralac or similar on the screws.

Unfortunately with alloy corrosion, it is very difficult to get it all gone before painting, so re occurrence is very likely. Get a stainless steel wire brush to work the corrosion out of the pits. I have also used synthetic wire brushes. Time will tell if they worked or not.

Do you have corrosion going under the screen seal? 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #991742 7th May 2023 7:36am
View user's profile Send private message View poster's gallery Reply with quote
Landowner



Member Since: 06 Jan 2023
Location: Somerset
Posts: 66
United Kingdom 2012 Defender 90 Puma 2.2 HT Keswick Green
Thanks both, the snorkel is going so I will need to plug the holes once I know what I’m dealing with. It all sounds doable, assuming the corrosion does not go y=under the seal, I don’t think it does but until I start prepping I guess I won’t know.
Thanks
Post #991776 7th May 2023 4:44pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums