Home > General & Technical (L663) > Collision avoidance and emergency lane keeping |
|
|
Retroanaconda Member Since: 04 Jan 2012 Location: Scotland Posts: 2646 |
Yes part of the nanny state nonsense.
And no, to my knowledge there’s no way to turn them off permanently. I am hoping the people doing the IID Tool will find a setting to allow us to do that. |
||
18th Apr 2023 5:32pm |
|
XplusYplusZ Member Since: 16 Aug 2021 Location: UK Posts: 485 |
Unusually, I had a few collision alarms yesterday actually. Mostly due to cyclists whipping through traffic in London Rush hour. They usually just trigger the parking assistance beeping. But yesterday, I had 3 random collision warnings. But only the alarm, not emergency braking.
Did you get actual emergency braking? What caused it? I understand the emergency braking is going to become mandatory in the next few years - like abs. Should save a lot of daft bumps. |
||
19th Apr 2023 10:21am |
|
lightning Member Since: 23 Apr 2009 Location: High Peak, Derbyshire Posts: 2770 |
l was turning right and a car passed in the other direction, l was still moving at around 5mph and had not started to turn.
Because l was turning, l was right next to the centre of the road. The Defender braked suddenly and l thought something had hit me from behind, the engine also cut out and l had to re start it. |
||
22nd Apr 2023 7:32pm |
|
ROAVR_Matt Member Since: 30 Apr 2023 Location: Inverness Posts: 6 |
On the single lanes we have up here everyone in the Highlands those features are just plain leathal. In the 50k we put on the 110 there were at least an occasion a week where it tried to turn me into oncoming traffic!
|
||
1st May 2023 7:18am |
|
lightning Member Since: 23 Apr 2009 Location: High Peak, Derbyshire Posts: 2770 |
l've bought the GAP diagnostic tool and hopefully there will be a way to turn this off, or at least the vehicle remembers your settings so once you turn it off in the menu it stays off.
|
||
1st May 2023 8:10am |
|
J77 Member Since: 04 Nov 2019 Location: Fife Posts: 3395 |
Can’t say I’ve noticed much of an issue with mine, emergency braking activation is set to normal in the settings. 24MY 90 D250 HSE, Tasman Blue
|
||
1st May 2023 11:25am |
|
lightning Member Since: 23 Apr 2009 Location: High Peak, Derbyshire Posts: 2770 |
lt always defaults to "Normal"
lf you change anything it reverts to "Normal" next time you use the vehicle |
||
1st May 2023 1:29pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis