↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Defender 90 rear spring lengths
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
lemons



Member Since: 13 Jul 2021
Location: London
Posts: 20

United Kingdom 2010 Defender 90 Puma 2.4 HT Santorini Black
Defender 90 rear spring lengths
Does anyone happen to know the rear spring lengths for a defender 90? I seem to have odd springs on my new truck and can't work out which one is the correct length...

Thanks in advance!
Post #988540 10th Apr 2023 8:46pm
View user's profile Send private message View poster's gallery Reply with quote
DSC-off



Member Since: 16 Oct 2014
Location: North East
Posts: 1410

United Kingdom 2015 Defender 110 Puma 2.2 XS CSW Aintree Green
Hi, genuine Landrover original springs are colour coded with paint stripes to identify the spring and rate. You may be able to find some traces of paint on yours.
The chart in the link below is a very good reference for original specs and some common aftermaket springs.

The genuine springs are different specs for LH or RH. Aftermarket are often the same for both sides.
NRC9448, Driver side non HD, blue/red, 15.3"
NRC9449, Passenger side non HD, yellow/white, 14.8"

http://red90.ca/rovers/springinfo.html
Post #988546 10th Apr 2023 10:06pm
View user's profile Send private message View poster's gallery Reply with quote
discomog



Member Since: 09 May 2015
Location: Notts/Lincs Border
Posts: 2527

United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Santorini Black
DSC-off, that's a pretty comprehensive spreadsheet, thanks for sharing. Defender 90XS SW
Mini Countryman Cooper S
Morgan Plus 8
Post #988555 11th Apr 2023 7:17am
View user's profile Send private message View poster's gallery Reply with quote
StressedComa



Member Since: 23 Jul 2022
Location: Wakefield
Posts: 64

2011 Defender 90 Puma 2.4 CSW Sumatra Black
That sheet doesn’t cover PUMA’s though, that can be found here:

https://www.defender2.net/forum/topic62752.html

I recently changed the rear springs on my 90 as the ride was shocking so changed everything just to be safe. I can measure the take off springs if you want as they’re in the garage. They’re some of the progressive ones for a CSW but not sure which ones as can’t see any paint markings.

I replaced with some normal Flatdog springs which weren’t the same length so I put the longer one on the drivers side. They might be aftermarket as from what I can gather with the introduction of the Puma they started making all springs the same length.

I hope that helps in some way!
Post #988573 11th Apr 2023 9:03am
View user's profile Send private message View poster's gallery Reply with quote
lemons



Member Since: 13 Jul 2021
Location: London
Posts: 20

United Kingdom 2010 Defender 90 Puma 2.4 HT Santorini Black
Thanks all - very useful as ever

Having checked, it looks like it's actually on the correct springs - is it normal for them not to sit level (rides higher drivers rear side, but have never noticed this one other defenders I've had), or is there a chance one of the springs has sagged?
Post #988680 11th Apr 2023 8:20pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums