DEFENDER2.NET - View topic - Rear tub adjustment

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Rear tub adjustment

Page 1 of 1

Print this entire topic ·

Pike3450

Member Since: 04 Feb 2022
Location: Sussex
Posts: 16

Rear tub adjustment

Morning/afternoon all

Is there any adjustment on rear tub defender 90 200tdi, at seatbox end. Fitting half doors on a rebuild and looks like the rear tub needs to come up a little.

Cheers in advance

25th Nov 2022 11:25am

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3414

2012 Defender 90 Puma 2.2 CSW Santorini Black

Mine, a pre 200tdi just sat on the 6 tabs that are welded on the chassis. There are rubber isolators between the tub and the chassis, that are pop riveted to the 3 tub under floor members. Check that yours are not missing.
Was there any welding to the bulkhead outriggers that could put the bulkhead( hence the A post) a bit out of alignment? 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

25th Nov 2022 1:10pm

Pike3450

Member Since: 04 Feb 2022
Location: Sussex
Posts: 16

Cheers for the response dinnu

Figured it out now. Rubber pads were all there. Had to raise tub at seatbox end 3mm too get door gap right. New chassis. Thought I’d ask before I removed everything, and was missing something

Cheers

25th Nov 2022 7:05pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum