 | Home > Maintenance & Modifications > Clutch pipe clip part no? |
 
|
|
|
| rallysteve Member Since: 10 Feb 2014 Location: Cumbria Posts: 2225   
|
Morning, i am struggling to find the correct part number for one of the clutch pipe clips on my RHD TD5.
The clip in question goes on the passenger side of the bulkhead/footwell and is a couple of inches above the bracket where the steel pipe transitions to the flexi hose:  Click image to enlarge The parts diagrams dont show this type of clip (only the awful two piece ones). It looks a lot like the chassis brake pipe clips but i believe it is a different size due to the larger bore (1/4" vs 3/16") clutch pipe size. Can anyone help please? Thanks, Steve 02' 110 TD5 Double Cab Rebuild Thread |
||
7th Oct 2022 7:56am |
|
| geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410
|
Hi Steve,
Possibly NTC9543L https://rimmerbros.com/Item--i-NTC9543L--S...gL-1vD_BwE |
||
|
7th Oct 2022 8:15am |
|
| blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17344 
|
You might find something here:
https://www.sdproducts.co.uk/cable-pipe-and-hose-fasteners or here: https://www.carbuilder.com/uk/brake-system...orderBy=15 |
||
|
7th Oct 2022 9:39am |
|
| rallysteve Member Since: 10 Feb 2014 Location: Cumbria Posts: 2225
|
Thanks both,
That NTC9543 does look the same but shows up on the brake pipe diagrams so might not be big enough. I think I might have a few in my parts stash though so I will try one and see if it can take the larger pipe. That looks a decent supplier cheers Blackwolf, even if i don't need this clip there are some others I can see myself buying from them! Cheers, Steve 02' 110 TD5 Double Cab Rebuild Thread |
||
|
7th Oct 2022 10:46am |
|
| I Like Old Skool Member Since: 23 Feb 2015 Location: Manchester Posts: 806 
|
Microfiche! The parts counter person would go to the general assembly pages then flip the screen around and you would point joyfully, only to be told that part is discontinued.....
 |
||
|
7th Oct 2022 3:49pm |
|
| blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17344
|
Yes, in my case it was a weekly visit to EVE components in Iver Heath (the best local place for SI parts) and the nearest thing to microfiche was the storeman's brain - it was rare that he had to look up a part number.
Sadly all gone now in the name of progress. |
||
|
7th Oct 2022 5:00pm |
|
| diesel_jim Member Since: 13 Oct 2008 Location: hiding Posts: 6090 
|
I too found myself slurping my cider and browsing that site..... could get expensive!! Damn you BW!!  |
||
|
7th Oct 2022 6:38pm |
|
| rallysteve Member Since: 10 Feb 2014 Location: Cumbria Posts: 2225
|
Can confirm the clutch pipe clip is NTC9543, the new ones I have are identical to the original that I removed from the bulkhead. It seems to be able to retain the brake or clutch pipe sizes.
Cheers  02' 110 TD5 Double Cab Rebuild Thread |
||
|
10th Oct 2022 8:11am |
|
| geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410
|
Brilliant.
Glad it was the right part. |
||
|
10th Oct 2022 8:32am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
