DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > V8 > Exhausts

Page 1 of 1

Print this entire topic ·

BaronDefenders

Member Since: 28 Jun 2019
Location: London/Cotswolds
Posts: 896

2004 Defender 90 Td5 CSW Santorini Black

Exhausts

I’ve decided that my V8’s exhaust is nothing short of pathetic. Unlike my Td5, it doesn’t trigger my tinnitus, and so it’s too quiet

There don’t seem to be any proper off the shelf options for a 3.5 110, meaning a custom job has to be the best way forwards.

I would take it to Demand, but they’re hardly local to me.

Does anyone have any recommendations for an exhaust fabricator around the Cotswolds or SW London/Surrey?

Cheers! Charlie

1949 Series 1 80 (SOLD)
2002 Td5 90 (SOLD)
2008 Freelander 2 (SOLD)

1958 Series 2 88 Pastel Green (2019 LR Legends Best Restored)
1983 V8 110 Limestone (Previously owned by Tom Sheppard MBE)
2004 Td5 90 Santorini Black (Td5INSIDE Powered & Rebuilt by CSK)
2012 Puma 110 Zermatt Silver (Overlanding Build)

Instagram: @BaronDefenders

11th May 2022 3:48pm

Hufflepuff

Member Since: 25 Oct 2014
Location: Hampshire
Posts: 727

There are off the shelf items, for example the Double-S system which I bought for mine:

https://stainlesssteelexhausts.co.uk/land-...st-system/

The manifolds were touching the chassis rails so I ended up ditching them, but hey it was off the shelf

2005 Td5 90 XS
1989 V8 110 CSW

12th May 2022 8:20am

MercianRover

Member Since: 07 Apr 2022
Location: Culworth
Posts: 141

1998 Defender 110 300 Tdi CSW Java Black

I built the system on my 100" Bowler using parts from Jetex, it's a bit like lego.

I used 2.0" for the y-piece to 2.5" thereafter - might be worth a look if you can weld.

12th May 2022 8:27am

BaronDefenders

Member Since: 28 Jun 2019
Location: London/Cotswolds
Posts: 896

Hufflepuff wrote:
There are off the shelf items, for example the Double-S system which I bought for mine:

https://stainlesssteelexhausts.co.uk/land-...st-system/

The manifolds were touching the chassis rails so I ended up ditching them, but hey it was off the shelf

I had seen that system, but comments about the headers touching the rails have put me off. How does it sound though? Charlie

1949 Series 1 80 (SOLD)
2002 Td5 90 (SOLD)
2008 Freelander 2 (SOLD)

1958 Series 2 88 Pastel Green (2019 LR Legends Best Restored)
1983 V8 110 Limestone (Previously owned by Tom Sheppard MBE)
2004 Td5 90 Santorini Black (Td5INSIDE Powered & Rebuilt by CSK)
2012 Puma 110 Zermatt Silver (Overlanding Build)

Instagram: @BaronDefenders

12th May 2022 9:29am

BaronDefenders

Member Since: 28 Jun 2019
Location: London/Cotswolds
Posts: 896

MercianRover wrote:
I built the system on my 100" Bowler using parts from Jetex, it's a bit like lego.

I used 2.0" for the y-piece to 2.5" thereafter - might be worth a look if you can weld.

Sadly I can’t weld! Charlie

1949 Series 1 80 (SOLD)
2002 Td5 90 (SOLD)
2008 Freelander 2 (SOLD)

1958 Series 2 88 Pastel Green (2019 LR Legends Best Restored)
1983 V8 110 Limestone (Previously owned by Tom Sheppard MBE)
2004 Td5 90 Santorini Black (Td5INSIDE Powered & Rebuilt by CSK)
2012 Puma 110 Zermatt Silver (Overlanding Build)

Instagram: @BaronDefenders

12th May 2022 9:30am

Hufflepuff

Member Since: 25 Oct 2014
Location: Hampshire
Posts: 727

BaronDefenders wrote:

I had seen that system, but comments about the headers touching the rails have put me off. How does it sound though?

I'll tell if I ever get it started... I ended up using cast manifolds and welding a connection piece on. Like you I couldn't weld before this project either, now I'm addicted to welding

(although many would say I still can't weld) 2005 Td5 90 XS
1989 V8 110 CSW

12th May 2022 2:32pm

BaronDefenders

Member Since: 28 Jun 2019
Location: London/Cotswolds
Posts: 896

Ah, righto

It’s something I’d love to learn, but don’t have a workshop to support the kit needed. Charlie

1949 Series 1 80 (SOLD)
2002 Td5 90 (SOLD)
2008 Freelander 2 (SOLD)

1958 Series 2 88 Pastel Green (2019 LR Legends Best Restored)
1983 V8 110 Limestone (Previously owned by Tom Sheppard MBE)
2004 Td5 90 Santorini Black (Td5INSIDE Powered & Rebuilt by CSK)
2012 Puma 110 Zermatt Silver (Overlanding Build)

Instagram: @BaronDefenders

12th May 2022 2:38pm

Linds Hanson

Member Since: 16 Jan 2021
Location: Cornwall
Posts: 486

Just fit RRC/Disco one 3.9 manifolds, RRC/D1 twin front pipes and y section, then bolt straight up to the standard TD5 110 silencer and tail pipe. You will need the TD5 exhaust mounts and bolt on chassis brackets too. This is much better than the SS tiny system and gives a nice deep note

12th May 2022 5:09pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17387

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

If it is of any interest I have a pair of genuine V8 manifolds taken from a V8 90 surplus to requirements and I'd be glad to sell them. They're in good condition and fully usable, and also include the heat shield thingy in the photo.

I rather suspect that you have an identical pair already fitted to your motor though.

12th May 2022 6:25pm

BaronDefenders

Member Since: 28 Jun 2019
Location: London/Cotswolds
Posts: 896

Thanks for the offer, blackwolf, but they look like what my 110 has fitted at present. Charlie

1949 Series 1 80 (SOLD)
2002 Td5 90 (SOLD)
2008 Freelander 2 (SOLD)

1958 Series 2 88 Pastel Green (2019 LR Legends Best Restored)
1983 V8 110 Limestone (Previously owned by Tom Sheppard MBE)
2004 Td5 90 Santorini Black (Td5INSIDE Powered & Rebuilt by CSK)
2012 Puma 110 Zermatt Silver (Overlanding Build)

Instagram: @BaronDefenders

12th May 2022 7:04pm

BaronDefenders

Member Since: 28 Jun 2019
Location: London/Cotswolds
Posts: 896

I think I’ve decided I’ll go for 3.9 manifolds with a custom system from there back.

So, does anyone have any 3.9 manifolds for sale?

Charlie

1949 Series 1 80 (SOLD)
2002 Td5 90 (SOLD)
2008 Freelander 2 (SOLD)

1958 Series 2 88 Pastel Green (2019 LR Legends Best Restored)
1983 V8 110 Limestone (Previously owned by Tom Sheppard MBE)
2004 Td5 90 Santorini Black (Td5INSIDE Powered & Rebuilt by CSK)
2012 Puma 110 Zermatt Silver (Overlanding Build)

Instagram: @BaronDefenders

13th May 2022 11:14am

Ranger 6

Member Since: 17 Jan 2019
Location: Yorkshireman trapped in a Surrey postcode
Posts: 198

1988 Defender 90 V8 Petrol CSW Rimini Red

I've got some 3.9 manifolds fitted to mine (sorry, can't help with any more

) with this solution for the exhaust:

Linds Hanson wrote:
Just fit RRC/Disco one 3.9 manifolds, RRC/D1 twin front pipes and y section, then bolt straight up to the standard TD5 110 silencer and tail pipe. You will need the TD5 exhaust mounts and bolt on chassis brackets too. This is much better than the SS tiny system and gives a nice deep note

As mentioned, it's a decent sound, nice and deep without being tinny, and a sensible noise level. I did find that a set of BBW needles also lifts the drivability and throttle response. 90 V8 CSW - 1988

24th May 2022 3:44pm

Ranger 6

Member Since: 17 Jan 2019
Location: Yorkshireman trapped in a Surrey postcode
Posts: 198

Don't know if this will help - here's a sound clip of the TD5 exhaust on a 90 with 3.9 manifolds

https://youtube.com/shorts/PCcFFEJwHcI?feature=share 90 V8 CSW - 1988

24th May 2022 5:21pm

gcc130

Member Since: 05 Jun 2015
Location: Wiltshire
Posts: 739

I used a guy at the garage in Oare near Marlborough to make me a stainless system for my series 1, which runs a 2.5l petrol with ACR SU carb and branch manifold.
Not cheap but he made a good job.

25th May 2022 1:02pm

BaronDefenders

Member Since: 28 Jun 2019
Location: London/Cotswolds
Posts: 896

I’ve got a set of 3.9 manifolds to work with now, but I’m going to have a bespoke system made at a place near Stroud. Charlie

1949 Series 1 80 (SOLD)
2002 Td5 90 (SOLD)
2008 Freelander 2 (SOLD)

1958 Series 2 88 Pastel Green (2019 LR Legends Best Restored)
1983 V8 110 Limestone (Previously owned by Tom Sheppard MBE)
2004 Td5 90 Santorini Black (Td5INSIDE Powered & Rebuilt by CSK)
2012 Puma 110 Zermatt Silver (Overlanding Build)

Instagram: @BaronDefenders

25th May 2022 4:07pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum