 | Home > Tdi > Galvanised Bulkhead |
 
|
|
|
| Retroanaconda Member Since: 04 Jan 2012 Location: Scotland Posts: 2642  
|
Get a genuine one in good nick and have it done.
|
||
6th May 2022 8:55pm |
|
| Tommybahama32 Member Since: 11 Sep 2017 Location: cheshire Posts: 31  
|
I fitted a Shielder bulkhead in 2020, had no real problems, I debated getting my original one refurbed but the cost was not far off getting a new one with all new steel. There were a few tweaks to do new holes to drill but overall not a bad job. Allow plenty of time for this job because to do it right takes patience. But overall a good experience.
 |
||
|
7th May 2022 6:15am |
|
| Disco_Mikey Member Since: 16 Nov 2014 Location: Dundee Posts: 531 
|
Shielder are utter
 . I'd never, ever fit another 
Our next one will be an Ultra. Know of a few LR specialists who have fitted them without issue |
||
|
7th May 2022 1:29pm |
|
| Marccus Member Since: 29 Dec 2017 Location: Staffordshire Posts: 2 
|
Many thanks for the replies. I have contacted Ultra and sounds promising. I would have thought more companies would be making these nowadays.
|
||
|
15th May 2022 7:29pm |
|
| ItsMeYouKnow Member Since: 28 Apr 2023 Location: Chester Posts: 2 
|
Did you go with the Ultra Bulkhead? If so how was it?
|
||
|
28th Apr 2023 7:46am |
|
| Linds Hanson Member Since: 16 Jan 2021 Location: Cornwall Posts: 485
|
There are probably too many people making bulkheads now! Sheilder is a waste of time we prepped and painted their offering went to fit and literally every dimension was inaccurate! Decided we could'nt put our name to it so removed it and fitted a late Puma used one instead. Ultra we have used and found fitted fine apart from wiper wheel boxes but it would never pass as a original. We are now using the Richards ones which are a complete authentic copy of the Genuine article. Maer produce a stainless steel bulkhead but we havent had any experience with these yet. Pegasus who have produced Series bulkheads for some time are also now making Defender bulkheads.Hobson Industries also sell a stainless bulkhead but this is much more expensive than the other offerings. SP panels also offer a universal galvanised bulkhead which spans from 1983 to 2006 so again not a totally built to spec version.
|
||
|
28th Apr 2023 9:26am |
|
| ItsMeYouKnow Member Since: 28 Apr 2023 Location: Chester Posts: 2
|
Thank you for that. As far as I am aware the Maer bulkheads are still in development.
|
||
|
28th Apr 2023 11:20am |
|
| Chugga90 Member Since: 07 Sep 2014 Location: Bucks Posts: 208 |
A friend ordered from Pegasus for his 1992 Defender.
Failed to get from them and took ages to get a refund. Proceed with caution with them. |
||
|
28th Apr 2023 12:20pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
