DEFENDER2.NET - View topic - Inexpensive security tweak

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Inexpensive security tweak

Page 1 of 1

Print this entire topic ·

steveww

Member Since: 05 Jan 2022
Location: Uppingham
Posts: 572

2015 Defender 110 Puma 2.2 XS CSW Bronze Green

Inexpensive security tweak

As I'm sure you all know, the right hand wing vent is held on by a few self-tapping screws. Undoing these removes the vent and provides access to the engine bay and the bonnet cable. You can swap out the plain self-tappers for security ones. However, I purchased a set of security driver bits off Amazon for ten quid, not exactly secure. There are various plates available from the usual suspects that can be riveted in place.

A quick and inexpensive option is to replace the self-tappers with machine screws and nylon nuts. Security drive or nit, it does not matter. Once loosened the screw is going to turn forever, unless you can get a spanner on the nylon nut inside the bonnet. A few stainless screws and nuts are available for a few quid.

7th Feb 2022 9:09pm

X4SKP

Member Since: 29 Nov 2013
Location: Berkshire
Posts: 2295

2010 Defender 90 Puma 2.4 SW Stornoway Grey

Hello steveww

Factory Fit...

Standard Security Fasteners...

Custom Security Fasteners...

Sub-Surface Plate...

Nylock Nuts...

worth the minimal effort...

SKIP
https://www.defender2.net/forum/topic83242.html

8th Feb 2022 8:59am

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

That's one of the early jobs that I did to mine, although since replaced with a snorkel connection.

Click image to enlarge
It's also worth securing the bonnet release cable at the grill end, too:

https://www.defender2.net/forum/post707201.html#707201 Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

8th Feb 2022 9:12am

steveww

Member Since: 05 Jan 2022
Location: Uppingham
Posts: 572

Thanks for the tip on the slam panel cable guard, however I've already done that one.

8th Feb 2022 9:36am

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

Good to hear

Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

8th Feb 2022 9:54am

Mo Murphy

Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2270

1984 Defender 90 BMW M57 3.0 Diesel HT Auto Pennine Grey

I feel so inadequate now, I don't have a bonnet release cable 😉
Mo The Land Rover 90 - Many are called, few are chosen.

50 Shades of Pennine Grey

8th Feb 2022 10:19am

Retroanaconda

Member Since: 04 Jan 2012
Location: Scotland
Posts: 2685

I haven’t got one either. Are you suggesting that my looped cable tie sticking out of the grille is not good enough Mo?

8th Feb 2022 4:30pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum