↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Just appeared on the GTR: SSM40851
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
CapeLandy



Member Since: 21 Jul 2008
Location: Cape Town
Posts: 558
South Africa 
grease nipples
By the way - I found that the nipples at the diff end of the prop shafts are not reachable by the standard grease gun head. It's diameter will not fit between the knuckles no matter how you turn the UJ.
I bought one of those little hand held grease guns with the plunger where there is no head as such but just a cup end that you have to press hard up against the nipple.
Problem is you really need to press hard to force any grease in.
Not sure what type the workshop use to access them.

James Puma 110 - gone
Series III 1973 - going strong
Post #9337 2nd Apr 2009 12:16pm
View user's profile Send private message View poster's gallery Reply with quote
Bosun



Member Since: 21 Jul 2008
Location: Great Berry
Posts: 141
2008 Defender 90 Puma 2.4 XS CSW Tonga Green
If it's a LR dealer workshop they probably don't bother.
Post #9340 2nd Apr 2009 1:52pm
View user's profile Send private message View poster's gallery Reply with quote
MK



Member Since: 28 Aug 2008
Location: Santiago
Posts: 2414
Chile 2007 Defender 110 Puma 2.4 SW Chawton White
No std gun will reach the bloody nipples. And it is right: dealers don`t bother at all. There are two ways a) reduce the diametre by grinding it or b) get a long sort of needle to plug in. With the former you will need help anyway. Puma 110" SW

.............................................................
Earth first. Other planets later
Post #9341 2nd Apr 2009 2:56pm
View user's profile Send private message View poster's gallery Reply with quote
mrwoo



Member Since: 03 Jan 2008
Location: Cheshire
Posts: 286
United Kingdom 2004 Defender 90 Td5 CSW Epsom Green
How to grease your nipples without getting covered in the stuff, this is using a standard grease gun to!

1. Jack the front of vehicle (both wheels)
2. Put the low range lever in neutral
3. Turn the front prop to get the perfect grease gun angle
4. Grease all 3 nipples on the front prop
5. Drop the vehicle and do the same with the rear

Hope this helps, it has worked perfectly for me in the past! Thumbs Up
Post #9348 2nd Apr 2009 8:26pm
View user's profile Send private message View poster's gallery Reply with quote
Bosun



Member Since: 21 Jul 2008
Location: Great Berry
Posts: 141
2008 Defender 90 Puma 2.4 XS CSW Tonga Green
Just got mine back from the dealer with a new front prop because of a missing grease nipple. Boy are the grease nipples difficult to get the gun on, I'm not sure they are oriented quite right. Does anyone know what type of fitting they are, screw-in or drive-in, I might give them a tweek myself. Also, the new prop doesn't have a nipple for the sliding joint, is it now greased for life, or something else LR have forgot to fit?
Bosun.
Post #9463 6th Apr 2009 6:36am
View user's profile Send private message View poster's gallery Reply with quote
shorty



Member Since: 31 Oct 2008
Location: Hillcrest, Kwa Zulu Natal
Posts: 160
South Africa 2009 Defender 90 Puma 2.4 XS CSW Chawton White
Mine was vibrating terribly on the front. Just phoned the dealership and asked them to check and they can confirm that the front nipple is missing. Thanks Eduardo. They were a bit shocked that i had access to the info and led them in the right direction. Land Rover's don't leak oil, they simply mark their territory!
Post #9467 6th Apr 2009 9:15am
View user's profile Send private message View poster's gallery Reply with quote
mhasting2004



Member Since: 07 Dec 2008
Location: Gosford
Posts: 29
Australia 2008 Defender 110 Puma 2.4 SW Stornoway Grey
mrwoo wrote:
How to grease your nipples without getting covered in the stuff, this is using a standard grease gun to!

1. Jack the front of vehicle (both wheels)
2. Put the low range lever in neutral
3. Turn the front prop to get the perfect grease gun angle
4. Grease all 3 nipples on the front prop
5. Drop the vehicle and do the same with the rear

Hope this helps, it has worked perfectly for me in the past! Thumbs Up


No problems except step 4.... where's the 3rd nipple! Asked the dealer and they said that the new prop shafts dont have one for the splines! Can't see where one would be missing either.

Cheers

Mark
Post #9600 10th Apr 2009 9:57am
View user's profile Send private message View poster's gallery Reply with quote
mrwoo



Member Since: 03 Jan 2008
Location: Cheshire
Posts: 286
United Kingdom 2004 Defender 90 Td5 CSW Epsom Green
mhasting2004 wrote:
mrwoo wrote:
How to grease your nipples without getting covered in the stuff, this is using a standard grease gun to!

1. Jack the front of vehicle (both wheels)
2. Put the low range lever in neutral
3. Turn the front prop to get the perfect grease gun angle
4. Grease all 3 nipples on the front prop
5. Drop the vehicle and do the same with the rear

Hope this helps, it has worked perfectly for me in the past! Thumbs Up


No problems except step 4.... where's the 3rd nipple! Asked the dealer and they said that the new prop shafts dont have one for the splines! Can't see where one would be missing either.

Cheers

Not sure! My 2007 model has 3 nipples per shaft, one for each UJ and one on the shaft for the sliding joint.
Thumbs Up

Mark
Post #9607 10th Apr 2009 3:20pm
View user's profile Send private message View poster's gallery Reply with quote
Anvil



Member Since: 16 Jan 2009
Location: Milan
Posts: 21
Italy 2008 Defender 90 Puma 2.4 CSW Tonga Green
Also here in the barbaric Italy some models seems to mount "greased to life" prop, so no nipple for the shaft ... not the black policeman Very Happy
We were wondering about the meaning of the word "life" in LR engineer's mind ... how long should it last ?
ohhh ... but this is a true philosophical question Very Happy
Post #9695 14th Apr 2009 8:52pm
View user's profile Send private message View poster's gallery Reply with quote
Paul55



Member Since: 03 Feb 2009
Location: Somewhere in my head!
Posts: 511
England 2008 Defender 90 Puma 2.4 XS CSW Santorini Black
Hi guys, novice here, could you let me know which grease I should use on the propshafts and can I buy it locally from Halfords or the like.
ps how do I know when I have put the correct amount of grease in? Cogito ergo sum
Post #9712 15th Apr 2009 9:49am
View user's profile Send private message View poster's gallery Reply with quote
Grockle



Member Since: 24 Nov 2008
Location: Peak District National Park
Posts: 2266
United Kingdom 2008 Defender 90 Puma 2.4 XS CSW Tonga Green
Paul, it will come out of the joints. 2.4 90 XS
1968 1/32 scale Britains 109 Pick up.
Post #9714 15th Apr 2009 10:12am
View user's profile Send private message View poster's gallery Reply with quote
Paul55



Member Since: 03 Feb 2009
Location: Somewhere in my head!
Posts: 511
England 2008 Defender 90 Puma 2.4 XS CSW Santorini Black
Cheers Grockle. Thumbs Up Cogito ergo sum
Post #9715 15th Apr 2009 10:34am
View user's profile Send private message View poster's gallery Reply with quote
Anvil



Member Since: 16 Jan 2009
Location: Milan
Posts: 21
Italy 2008 Defender 90 Puma 2.4 CSW Tonga Green
Hi Paul ... the suggested grease for props and joints is a Lithium based grade NLGI 2 grease.
It would be better if you find the EP (Extreme Pressure) one

I usually use John Deere Premium Plus ... but only because a friend of mine works for the Deer Very Happy and we usually exchange a pint for a pint Laughing
Post #9746 15th Apr 2009 10:24pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums