DEFENDER2.NET - View topic - Fuel pipe push on connectors

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Fuel pipe push on connectors

Page 1 of 1

Print this entire topic ·

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5843

1999 Defender 110 Td5 SW Caledonian Blue

Fuel pipe push on connectors

As you look at the fuel filter housing, the right hand side front connector does not seem to want to stay clicked in place (got disturbed when the garage did some welding in the area and had to disconnect the fuel filter housing) I noticed a slight leak from the connector over the weekend. For now I have tried to push it back into place but not convinced thats fully home/clipped into place.

Is it possible to buy new push on connectors? 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

23rd Nov 2021 3:08pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

Hi John. I believe these are what you are looking for https://www.ebay.co.uk/itm/384105940412?ch...vsQAvD_BwE

Had them bookmarked for just such an occurrence

23rd Nov 2021 3:54pm

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5843

Cheers Geobloke

A UK seller
https://www.ebay.co.uk/itm/164550246853?ha...SwsR5ffI4M

Does the existing fuel hose just pull off the barbs or am I setting myself up for a fight? 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

23rd Nov 2021 4:00pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

I am afraid I have not done this before John, but i would suspect that some gentle heat will soften the plastic enough to remove the old connector and emplace the new one. I would however add either a little sealant and/or a sprung clip like these

https://www.ebay.co.uk/itm/303530001800

23rd Nov 2021 4:08pm

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5843

Cheers
Some gentle heat might have to be the way forward. Or I take it back the garage and say fix this, it was fine before the work.!!

I will see how the connector goes over the next couple of days, before I start taking it apart. 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

23rd Nov 2021 4:10pm

rallysteve

Member Since: 10 Feb 2014
Location: Cumbria
Posts: 2227

2002 Defender 110 Td5 DCPU Keswick Green

Cant think off the top of my head which pipe that union is. I would probably replace the pipe though if I were you. To get a good seal with those barbed connections you need a fresh bit of pipe which will mean cutting the end off the current one and heating it up with a hot air gun. I fitted some new ends at the pump end on mine and wasnt easy.

I have got the old long fuel lines off my 110 TD5 if they are any use to you. You could possibly salvage the latching bit of the union off them to fix yours?

Cheers,
Steve 02' 110 TD5 Double Cab Rebuild Thread

23rd Nov 2021 4:23pm

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5843

Hi Steve

Good point on the pipe. If you have those pipes I could be interested ? PM details and we can discuss.

cheers 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

23rd Nov 2021 4:48pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

make shore you get right fitting to fit fuel filter fitting 7.89 to fit TD5

23rd Nov 2021 6:15pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum