DEFENDER2.NET - View topic - Permanet live - Simple for some

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > Permanet live - Simple for some - Not for me!

Page 1 of 1

Print this entire topic ·

Cubflyer

Member Since: 25 Sep 2021
Location: Suffolk
Posts: 278

Permanet live - Simple for some - Not for me!

Hi folk

My newly fitted radio keeps dumping its setting and has become a PITA to keep re-setting.

I've now learned that the radio's memory needs a permanent power source ... so my radio is in the area above the cigarette lighter / rear wiper switch.

Can anyone please tell me where I can pick up a constant rather than switched live please.

MTIA

John 2010 Defender 90 300Tdi CW (White/1994)
2021 Defender 90 300Tdi SW (Blue/1994)

13th Nov 2021 7:22pm

nitram17

Member Since: 08 Jun 2014
Location: newcastle
Posts: 2261

Hazard light feed i think that's permanent live.

13th Nov 2021 9:00pm

Cubflyer

Member Since: 25 Sep 2021
Location: Suffolk
Posts: 278

Thanks Nitram - Sounds a good starting place for tomorrow

John 2010 Defender 90 300Tdi CW (White/1994)
2021 Defender 90 300Tdi SW (Blue/1994)

14th Nov 2021 12:02am

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3479

2012 Defender 90 Puma 2.2 CSW Santorini Black

From your profile, I assume that you are referring to a 300tdi.
Although I never owned a 300, I would have assumed that you already have a permanent live behind the cigarette lighter cover.
My MY88 has it from the factory, and it is a base spec model. I think the colour coding did not change, so you should be looking for a purple wire. The courtesy light, also permanent live, as well as the supply for the hazard switch should be purple.

Edit: The interior light and the hazard light are on different fuses. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

14th Nov 2021 3:05am

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3479

I managed to find the below schematic for a MY97.

The memory supply to the radio, permanent feed, the wire is purple and is through Fuse 2 (which is the same fuse as the interior light).

The switchable power supply, which is what you already have is through Fuse 7, and wire colour is white/red.

Ensure that you have both switching supply and permanent feed to the radio. This way the radio switches off when you switch off from the ignition key, but keep a very small amount to power to the radio for memory purpose.

Click image to enlarge 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

14th Nov 2021 3:40am

jeffersj

Member Since: 23 Jan 2015
Location: Near Preston
Posts: 431

1996 Defender 90 300 Tdi HT Bronze Green

On my 300Tdi with a Pioneer radio I had the same problem and the solution was to just swap the 2 input wires around. Not sure where I got the informatiin from but the saved settings were not dumped. Jeff
Ex 1968 Series 2A
Ex 90 TD5
Ex D3
Ex D4

14th Nov 2021 9:07am

Cubflyer

Member Since: 25 Sep 2021
Location: Suffolk
Posts: 278

Dinnu wrote:
From your profile, I assume that you are referring to a 300tdi.
Although I never owned a 300, I would have assumed that you already have a permanent live behind the cigarette lighter cover.
My MY88 has it from the factory, and it is a base spec model. I think the colour coding did not change, so you should be looking for a purple wire. The courtesy light, also permanent live, as well as the supply for the hazard switch should be purple.

Edit: The interior light and the hazard light are on different fuses.

Morning Dinnu - Thank you very much for the two posts and diagram - much appreciated!

Hopefully that will sort my issue out, just got to wait for it to stop raining!

ATB

John 2010 Defender 90 300Tdi CW (White/1994)
2021 Defender 90 300Tdi SW (Blue/1994)

14th Nov 2021 9:23am

Cubflyer

Member Since: 25 Sep 2021
Location: Suffolk
Posts: 278

jeffersj wrote:
On my 300Tdi with a Pioneer radio I had the same problem and the solution was to just swap the 2 input wires around. Not sure where I got the informatiin from but the saved settings were not dumped.

Thanks Jeffers - appreciate the information too.

John 2010 Defender 90 300Tdi CW (White/1994)
2021 Defender 90 300Tdi SW (Blue/1994)

14th Nov 2021 9:25am

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3479

Check the radio. But most will have a red and yellow wire.
Usually the red will connect to white/red on the landy and yellow connects to purple. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

14th Nov 2021 10:23am

Cubflyer

Member Since: 25 Sep 2021
Location: Suffolk
Posts: 278

Thank you very much to all who replied - GREATLY appreciated!

Purple wire found and connected to the yellow of the radio - all settings now being held in the memory

... next job ... 2010 Defender 90 300Tdi CW (White/1994)
2021 Defender 90 300Tdi SW (Blue/1994)

14th Nov 2021 1:26pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum