DEFENDER2.NET - View topic - Front prop into transfer box

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Front prop into transfer box

Page 1 of 1

Print this entire topic ·

Ijk10

Member Since: 01 Apr 2021
Location: Newport
Posts: 37

2007 Defender 110 Puma 2.4 CSW Keswick Green

Front prop into transfer box

Hi all
Hoping for some advice on how to fix this issue.
There is play in the part the front prop goes into the transfer box.
Is it a simple bearing and seal replacement?

26th Jul 2021 12:43pm

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3403

2012 Defender 90 Puma 2.2 CSW Santorini Black

Part 5 and 11.
https://www.lrworkshop.com/diagrams/land-r...ge_53743#5

What I am not sure of is if it can be done in situ as there is the center diff locking ring on the front output shaft. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

26th Jul 2021 4:19pm

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3403

Btw, how much is 'some' play? 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

26th Jul 2021 4:20pm

Ijk10

Member Since: 01 Apr 2021
Location: Newport
Posts: 37

Thanks for the reply...
I was checking the uj and could feel and as the play where it enters the transfer box...i would imagine there should be no play at all in this area..and there is a definite clunk from this area..

26th Jul 2021 5:12pm

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3403

My old 90 had a very small amount of movement if I grab the front prop shaft and rock it up and down. Never gave any issues though. Unsure if play there can cause a clunk. But good to check the nut on the output flange. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

26th Jul 2021 5:26pm

jst

Member Since: 14 Jan 2008
Location: Taunton
Posts: 7987

2011 Defender 110 Puma 2.4 USW Stornoway Grey

Rotational play or linear? Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop

26th Jul 2021 7:04pm

Retroanaconda

Member Since: 04 Jan 2012
Location: Scotland
Posts: 2635

A small amount of radial play is normal as it’s a ball bearing not a taper roller. If it’s not leaking or rough to rotate then it will be fine.

26th Jul 2021 8:29pm

Ijk10

Member Since: 01 Apr 2021
Location: Newport
Posts: 37

jst wrote:
Rotational play or linear?

Linear play...

26th Jul 2021 9:18pm

Ijk10

Member Since: 01 Apr 2021
Location: Newport
Posts: 37

Retroanaconda wrote:
A small amount of radial play is normal as it’s a ball bearing not a taper roller. If it’s not leaking or rough to rotate then it will be fine.

It's not leaking but there is some movement

26th Jul 2021 9:19pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum