 | Home > In Car Electronics (L663) > Locking the car on a ferry |
 
|
|
|
| Retroanaconda Member Since: 04 Jan 2012 Location: Scotland Posts: 2646  
|
Yes, you can disable sensors for the next ignition cycle. You’ll also need to put the tracker into transport mode if you have that set up.
|
||
16th Jun 2021 7:22pm |
|
| AndrewS Member Since: 10 Apr 2007 Location: Hereford Posts: 3707  
|
Can't find anything in the iguide
 130's have feeling's as well you know  |
||
|
16th Jun 2021 7:24pm |
|
| J77 Member Since: 04 Nov 2019 Location: Fife Posts: 3395
|
I’m sure its in SETTINGS - VEHICLE, transport mode is in settings on the app 24MY 90 D250 HSE, Tasman Blue
|
||
|
16th Jun 2021 7:58pm |
|
| AndrewS Member Since: 10 Apr 2007 Location: Hereford Posts: 3707
|
I cant see any options in the app. I think its just a case of single press of key fob to lock doors only. 130's have feeling's as well you know
|
||
|
16th Jun 2021 9:07pm |
|
| Retroanaconda Member Since: 04 Jan 2012 Location: Scotland Posts: 2646
|
For the alarm you don’t do it on the app, it’s in the pivi pro settings menu, under the Vehicle category as above. Basically you drive onto the ferry, apply the settings in the menu and then the sensors are disabled for one ignition cycle.
You put the tracker into transport mode using the InControl app, it disables the movement alerts for a period of time. |
||
|
16th Jun 2021 9:13pm |
|
| J77 Member Since: 04 Nov 2019 Location: Fife Posts: 3395
|
Service and Transport modes are in MORE - VEHICLE SETTINGS
 Click image to enlarge 24MY 90 D250 HSE, Tasman Blue |
||
|
16th Jun 2021 9:22pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
