DEFENDER2.NET - View topic - Bolts for column shroud

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Bolts for column shroud

Page 1 of 1

Print this entire topic ·

jpboost

Member Since: 13 Apr 2021
Location: Gatwick
Posts: 377

2014 Defender 110 Puma 2.2 SW Keswick Green

Bolts for column shroud

Hi,
I've recently picked up my first Defender and am sorting through a few niggles. One of which is the steering column trim is loose. The two halves are bolted together, but the bolts holding the assembly to the column are missing.

Does anyone know size and thread of these? Normally I'd just take a selection of bolts out there and work it out via trial and errors, but I'm away from home at the moment, so I've got to buy them online.

I did look at a few of the workshop manual links but couldn't find the column shroud on any of the diagrams. It wasn't on any of the dash/trim related ones.

Thanks

Jon

30th Apr 2021 8:46am

Linds Hanson

Member Since: 16 Jan 2021
Location: Cornwall
Posts: 496

Is it pre Puma or Puma? Pre are M5 X20 and 1x short m5 machine screws and 2 selftapping screws into the switch bracket, Puma is just long self tapping screws and 2x short ST into switch brkt.

30th Apr 2021 11:34am

jpboost

Member Since: 13 Apr 2021
Location: Gatwick
Posts: 377

Hi,

It's a 2014 puma so Self tappers then.

I'll get some ordered

Thanks for the help

Cheers
Jon

30th Apr 2021 11:51am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum