Tim in Scotland wrote:

Steve W wrote:

Morning..... Is that the table that mounts to the existing fixings inside the door ? I quite fancy one of those as they look really good . Could you post a photo please once fitted ?

Thanks......

This is the one I’m fitting, it does need some adaptations to the mounting brackets so you don’t need to drill holes in the tailgate but you can use the existing torqx bolts with some small L shaped brackets. The tables with the wooden chopping board are double the price........ but someone with ability and tools could add one easily to this


Click image to enlarge

Thanks Tim.............

Tim in Scotland wrote:

Yes, but the ones that were linked to I bought and they aren’t wide enough to do the job. So I’ll take a 2 mile hike to the next village and get exactly what is needed made up

find the original post - someone put some fillets in to help the L sections attached to table supports reach the Torx bolt holes Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)

Tim in Scotland wrote:

Yes, but the ones that were linked to I bought and they aren’t wide enough to do the job. So I’ll take a 2 mile hike to the next village and get exactly what is needed made up

Did you resolve this Tim? I've only seen one set recommended and the do the job perfectly - all I did was squeeve an extra washer in next to the collar on each side of the table-to-bracket pivot mount to get a dead perfect fit. I reused the original torx bolts in the door with new M6 nuts to attach the brackets to the vertical side pieces (through 4 holes drilled in the brackets, not the door panel) and attached them to the rear door in the existing holes using new 30mm M6 dome headed bolts

this is the bottom left hand corner showing bracket, bolts, nuts and spacer washer on hinge


Table Open

Click image to enlarge

Table Closed

Click image to enlarge

Masking tape is just there to protect the paint work whilst using a socket ratchet to tighten up the bolt/nuts holding the vertical side mounts against the right angle brackets Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)