↓ Advertise on Defender2 ↓

Home > In Car Electronics > High beam woes
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
Badger110



Member Since: 06 Feb 2018
Location: South hams
Posts: 1039
United Kingdom 2011 Defender 110 Puma 2.4 USW Buckingham Blue
High beam woes
My high beam began to struggle whilst i was away in Scotland and i'd like to get it sorted.

High beam doesn't work, either pass or full on, however when i engage pass mode ( pull the stalk towards me ) the trailer light flickers and the hazard lights flicker on the dash.

This doesn't happen when i select high beam.

The blue light indicates on the dash that i'd selected high beam, just nothing actually lights up.

I believe i replaced the stalk not that long ago when i had issues with the indicators so i'm thinking along the lines of it being the stalk as it was a BP part anyway, but thought i'd ask in case someone tells me it's the 3 screw from the right after the diff lock selector has been tightened too much on a weekend Laughing
Post #871708 6th Dec 2020 10:49pm
View user's profile Send private message View poster's gallery Reply with quote
L110CDL



Member Since: 31 Oct 2015
Location: Devon
Posts: 10742
England 
The first thing that comes to mind is the hazard lights switch, but i'm no mechanic/electrician. 1996 Golf Blue 300Tdi 110 Pick up.

Keeper.

Clayton.
Post #872504 11th Dec 2020 8:21pm
View user's profile Send private message View poster's gallery Reply with quote
Badger110



Member Since: 06 Feb 2018
Location: South hams
Posts: 1039
United Kingdom 2011 Defender 110 Puma 2.4 USW Buckingham Blue
Me neither Wink

However, my powers of observation have led me to believe the culprit might be this;



Click image to enlarge


Click image to enlarge


Can anyone with some elastictricky knowledge point me in the direction of replacing the now defunct relays?

The loom is a Landreiziger , however I cannot find the relays alone on their website

Cheers
Post #877263 9th Jan 2021 2:20pm
View user's profile Send private message View poster's gallery Reply with quote
stew 46



Member Since: 26 Jan 2012
Location: Wadebridge ,cornwall .
Posts: 561
England 2010 Defender 110 Puma 2.4 USW Bonatti Grey
What age ?
Post #877274 9th Jan 2021 3:11pm
View user's profile Send private message View poster's gallery Reply with quote
Badger110



Member Since: 06 Feb 2018
Location: South hams
Posts: 1039
United Kingdom 2011 Defender 110 Puma 2.4 USW Buckingham Blue
Loom is about 2 years and I’m 46 thank you for asking Very Happy
Post #877277 9th Jan 2021 3:31pm
View user's profile Send private message View poster's gallery Reply with quote
htb2



Member Since: 02 Nov 2018
Location: Carmarthenshire
Posts: 529
Wales 
Are there not numbers on the base to identify from, other than the terminal numbers?
Post #877284 9th Jan 2021 3:57pm
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324
United Kingdom 
The plug in bases look like those that you'd use with a standard 30amp relay. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #877291 9th Jan 2021 4:12pm
View user's profile Send private message View poster's gallery Reply with quote
Badger110



Member Since: 06 Feb 2018
Location: South hams
Posts: 1039
United Kingdom 2011 Defender 110 Puma 2.4 USW Buckingham Blue
I got a close up picture of the base...the pins are bent so you can see the numbers



Click image to enlarge

Going clockwise from the top the numbers are ;

85-36-86-87

Thanks
Post #877315 9th Jan 2021 5:24pm
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324
United Kingdom 
It's likely 30 rather than 36 and it matches a standard relay:


Click image to enlarge Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #877321 9th Jan 2021 5:39pm
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17367
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
They should be bog standard relays, widely available. Just check (as LRA says) the pin numbers, these are SAE standard and will confirm the correct part.
Post #877324 9th Jan 2021 5:50pm
View user's profile Send private message View poster's gallery Reply with quote
Badger110



Member Since: 06 Feb 2018
Location: South hams
Posts: 1039
United Kingdom 2011 Defender 110 Puma 2.4 USW Buckingham Blue
Excellent, thanks all

I shall get some ordered Thumbs Up
Post #877330 9th Jan 2021 6:01pm
View user's profile Send private message View poster's gallery Reply with quote
dorsetsmith



Member Since: 30 Oct 2011
Location: South West
Posts: 4554
HELLA Relay Socket 8JD745801-011





HELLA 007794301 Cover with Weatherproof Mini ISO Relay




Last edited by dorsetsmith on 10th Jan 2021 1:02pm. Edited 1 time in total
Post #877342 9th Jan 2021 7:48pm
View user's profile Send private message View poster's gallery Reply with quote
Badger110



Member Since: 06 Feb 2018
Location: South hams
Posts: 1039
United Kingdom 2011 Defender 110 Puma 2.4 USW Buckingham Blue
i found Halfords do them, i shall pop down tomorrow and pick up a couple

https://www.halfords.com/tools/fuses-elect...84005.html
Post #877369 9th Jan 2021 10:52pm
View user's profile Send private message View poster's gallery Reply with quote
DAZ110



Member Since: 06 Dec 2007
Location: East Sussex
Posts: 2038
United Kingdom 2013 Defender 90 Puma 2.2 XS CSW Barolo Black
Have our been wading a little to deep then Badger110 ? Whistle Wink
Post #877434 10th Jan 2021 11:11am
View user's profile Send private message View poster's gallery Reply with quote
rallysteve



Member Since: 10 Feb 2014
Location: Cumbria
Posts: 2227
United Kingdom 2002 Defender 110 Td5 DCPU Keswick Green
https://www.12voltplanet.co.uk/twin-make-b...b3EALw_wcB 02' 110 TD5 Double Cab Rebuild Thread
Post #877450 10th Jan 2021 12:19pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums