DEFENDER2.NET - View topic - Bit dry perhaps?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Bit dry perhaps?

Page 1 of 1

Print this entire topic ·

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 909

Bit dry perhaps?

Click image to enlarge

FFS! Not sure if this car has had any maintenance in the last year or so. Offside rear wheel. Just need to assess what else got knackered in the process.

22nd Sep 2020 4:29pm

jst

Member Since: 14 Jan 2008
Location: Taunton
Posts: 8021

2011 Defender 110 Puma 2.4 USW Stornoway Grey

Wow, not seen one that bad for a while. Did owner not hear, feel it? See it glowing? Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop

22nd Sep 2020 7:21pm

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 909

Clearly not. All the grease had been flung out and it was so dry it must have been going for some while.
I didn't notice it on the drive back from Canterbury. Heard it on a short trip yesterday evening, stopped the truck and could smell it. Gave the wheel a tug and the amount of play left me wondering if would get home.
Bearing, brake pads and a disk required at least. Hoping there is no damage to the axle.
Will check the others before heading off again.

22nd Sep 2020 7:38pm

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4785

Oh dear

It may have damaged the stub axle, looking at that

2002 90 Td5 Station Wagon
1990 Vogue SE
Triumph Tiger Explorer 1200
Td5 90 Thread http://www.defender2.net/forum/topic50767.html
Tdi 110 Thread https://www.defender2.net/forum/topic69562.html
RRC Thread http://www.defender2.net/forum/topic54492.html
Instagram http://www.instagram.com/george_grafton

22nd Sep 2020 8:15pm

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 909

That is my worry. It does not seem bad on first inspection but I do need to work out how to get the bearing inner race off sonja can inspect fully.

Click image to enlarge

22nd Sep 2020 8:35pm

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4785

My area of concern would be the running surface for the hub seal. If that's damaged then the grease is going leak out/water get in and you'll be back to square one

22nd Sep 2020 8:42pm

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 909

The hub is definitely kaput. Come to think of it, I dont even recall seeing the remnants of a seal when I took it off. Hmmm.
Grease all over the disk and pads so the shopping list is
Bearing
Hub
Brake pads
Possible stub axle
New drive flange (worn so may as well replace now).

22nd Sep 2020 9:00pm

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4785

It might be worth getting a stub axle anyway, you know it'll be right then - definitely strip and check the other side, you might need 2 sets of bearings and seals

22nd Sep 2020 9:06pm

ickle

Member Since: 22 Jul 2010
Location: South Vendee
Posts: 1780

2008 Defender 110 Puma 2.4 CSW Alpine White

Is there an inboard oil seal on the driveshaft? If so need that as well.

23rd Sep 2020 11:29am

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 909

It looks like they took one kit and shared it across two sides

No sign of oil seals, no lock washers. They have either disintegrated or were never there.
At least we can do it properly this time round

Thanks for the tips, I'll make sure I get all those bits.

23rd Sep 2020 12:07pm

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 909

There do appear to be different options for hubs and stub axles. Assuming it has the correct axle, does anyone know what part numbers I should use for a 2005 110 td5?

23rd Sep 2020 12:10pm

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 909

Parts ordered. Was hoping to tackle this weekend but they are not likely to be here until Mon/Tue.
Stub axle, hub, bearing kit and new HD drive flanges. Going to convert to the older style two nut and locking washer for the bearing while I am at it.
Going to check the other side over the weekend as well, just to be sure.

25th Sep 2020 7:40am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum