DEFENDER2.NET - View topic - Install cubby box 110

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Install cubby box 110

Page 1 of 1

Print this entire topic ·

LandyHelp

Member Since: 09 Aug 2020
Location: caribbean
Posts: 13

Install cubby box 110

I have just gotten the britpart Chubby Cubby DA2662 to install in to my 2005 110. A bit odd - the old box came out and was mounted at the bottom with 4 legs to elevate it. The new replacement box doesnt have the legs but a elevated tray fixed to the bottom. Do you knock this tray off as it doesnt align with the screw holes. And how do you get off the drinks tray to put in the screws. Maybe just prise it off. Anyone know maybe?

9th Aug 2020 4:22pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769

The drinks tray should just lift out and you’ll probably have to drill holes to match up with your own mounting points if that’s your new cubby box picture in your gallery. You don’t need to take the battens off the bottom.

Good luck. You could use the old box to get old hole positions and probably reuse the old spacers if they are the plastic ones. Ray
My build thread
http://www.defender2.net/forum/topic17615.html

9th Aug 2020 4:30pm

LandyHelp

Member Since: 09 Aug 2020
Location: caribbean
Posts: 13

Yes that is the new boxes bottom and the old one has 4 plastic round tube like feet on the bottom. I will have another look at it. I prefer not to re use the old plastic feet and wasnt keen to take off the mounts on the new box. The drinks tray is fast glued on so will have to prise off.

Thanks much.

9th Aug 2020 4:41pm

TD5Neil

Member Since: 02 Nov 2017
Location: Cambridgeshire
Posts: 42

The drinks holder is held by 2 spots of glue. Use a wallpaper scraper and lever gently and it pops out. I knocked/prised the bottom bit off and reused the plastic spacers on mine, using the old one as a template for where to drill. Hope that helps. Cheers Neil

9th Aug 2020 5:25pm

miker

Member Since: 13 Sep 2015
Location: Surrey
Posts: 1763

My drinks tray was glued in. I ended up just screwing up from below into the battens.

9th Aug 2020 5:32pm

LandyHelp

Member Since: 09 Aug 2020
Location: caribbean
Posts: 13

Thanks all, will see if all this works. Doesnt sound too difficult.

9th Aug 2020 5:43pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum