DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Impact wrench

Page 1 of 1

Print this entire topic ·

ibexman

Member Since: 13 Dec 2008
Location: Essex
Posts: 2945

Impact wrench

Hog ring or detention pin what do you have🤔

12th May 2020 9:21am

sako243

Member Since: 08 Jul 2014
Location: Wales
Posts: 1219

1994 Defender 110 300 Tdi CSW Alpine White

Hog on my big Milwaukee. The pin detents can be a pain if you're changing sockets regularly. Ed
82 Hotspur Sandringham 6x6
95 Defender 110 300Tdi

12th May 2020 12:06pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17417

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

Several of each.

Generally ring up to 1/2" drive, above that I prefer pin.

12th May 2020 12:19pm

Ianh

Member Since: 17 Sep 2018
Location: Essex
Posts: 2019

I’ve both. Prefer the hog ring, works well on my Milwaukee. I managed to break the pin on my dewalt and it’s no where near as powerful as the Milwaukee.

12th May 2020 8:43pm

discomog

Member Since: 09 May 2015
Location: Notts/Lincs Border
Posts: 2527

2015 Defender 90 Puma 2.2 XS CSW Santorini Black

I hate to be pedantic but I'm not sure that the retaining ring you're referring to is a hog ring. A hog ring is a connector used to fasten materials together using special pliers and is normally a permanent or semi permanent fixture.

Click image to enlarge Defender 90XS SW
Mini Countryman Cooper S
Morgan Plus 8

13th May 2020 7:27am

ibexman

Member Since: 13 Dec 2008
Location: Essex
Posts: 2945

Well Mr Dewalt describes it as a hog ring

13th May 2020 7:49am

discomog

Member Since: 09 May 2015
Location: Notts/Lincs Border
Posts: 2527

and so does Mr Milwaukee. Like Blackwolf I prefer ring and pin for 3/4 drive and spring ring for 1/2" drive Defender 90XS SW
Mini Countryman Cooper S
Morgan Plus 8

13th May 2020 8:03am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17417

My reasoning is that a pin is more secure. Having seen sockets come off impact wrenches more than once, if you are hit by a 3/8" or 1/2" square drive socket it will hurt but is unlikely to maim. A 1" square drive socket is quite likely to inflict life-changing injuries, and is far too heavy in my opinion to rely on spring ring for retention.

I am not aware that spring ring is even an option above 1" square drive, the only system I have seen in 1.1/2" or above is the retaining pin.

13th May 2020 9:17am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum