↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Alarm volumetric/interior Protection Sensor
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
Martin 911-87



Member Since: 09 Mar 2020
Location: Sweden
Posts: 12
Sweden 
X4SKP wrote:
Hello Martin 911-87

Welcome aboard... just to add to the advice so far, I wanted to check mine
prior to purchase and on the advice of a specialist who checked the vehicle
I was told just to sit in the car, arm it via the fob and the intruder sensor then
becomes active (from memory) 15-20 seconds after the fob is pressed, so if
you get no alarm immediately...wait... then wave your arms around Exclamation

Good Luck


Thanks X4SK, and thanks for the advice! Thumbs Up
Just checked the car and the sensor is not installed.

/Martin
Post #822534 31st Mar 2020 5:25pm
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17527
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
Wiring runs up the A post, not B.
Post #822536 31st Mar 2020 5:45pm
View user's profile Send private message View poster's gallery Reply with quote
macfrank



Member Since: 05 Nov 2015
Location: somewhere in the north
Posts: 1083
Germany 2015 Defender 110 Puma 2.2 SW Keswick Green
Martin 911-87 wrote:
macfrank wrote:
sorry guys! my grammar! OF COURSE with „idiots“ I meant the scumbags who broke into the car!! Sad Thought that would be clear Embarassed I‘m really nice, honest Crying or Very sad


Hi macfrank,
It came across a little bit blunt
Sry. for my misunderstanding - I'm also nice Very Happy

//Martin


Thanks Martin! Even my wife get's me all wrong sometimes Sad
Post #822537 31st Mar 2020 6:04pm
View user's profile Send private message View poster's gallery Reply with quote
Martin 911-87



Member Since: 09 Mar 2020
Location: Sweden
Posts: 12
Sweden 
I know the feeling Laughing Laughing
Post #822545 31st Mar 2020 6:25pm
View user's profile Send private message View poster's gallery Reply with quote
Martin 911-87



Member Since: 09 Mar 2020
Location: Sweden
Posts: 12
Sweden 
blackwolf wrote:
Wiring runs up the A post, not B.


Thanks blackwolf Thumbs Up Thumbs Up
Post #822546 31st Mar 2020 6:26pm
View user's profile Send private message View poster's gallery Reply with quote
Martin 911-87



Member Since: 09 Mar 2020
Location: Sweden
Posts: 12
Sweden 
Hi,
I found some more information regarding the different part numbers for the volumetric sensor that should work iaw the information in the MG-Rover forum thread below.

https://www.mg-rover.org/threads/how-to-mg...or.775097/

YWC10227
YWC102890
YWC102900
YWC103640
YWC106520
YWC107000
YWC107040

/Martin
Post #822744 1st Apr 2020 2:51pm
View user's profile Send private message View poster's gallery Reply with quote
Martin 911-87



Member Since: 09 Mar 2020
Location: Sweden
Posts: 12
Sweden 
I have now installed a sensor in my car and everything works perfectly.
The wiring for the sensor was already installed in the car - it comes down from the centerline of the roof down to the B-pillar.
I remoeved the r/h backseat passenger handle consol (just above the door window) and ther I found the wiring with the connector.
I used a sensor from a Rover 75 that was at a scrap yard P/N: YWC102890.

//Martin


Click image to enlarge


Click image to enlarge


Click image to enlarge
Post #824456 10th Apr 2020 6:25pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums