Home > In Car Electronics > Labcraft Map Light |
|
|
ak615 Member Since: 22 Aug 2018 Location: essex Posts: 177 |
Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge I've been meaning to fit a map light for a while now but wasn't sure where to mount it. Thanks to jem90's post on the osram map light the solution was found. I opted for the labcraft version mainly because of the red light option ( ooer missus). I found one reasonably priced on eBay £24.95 https://www.ebay.co.uk/itm/201486223886 first up removed the side vent and dash screws (later realised that removal of the lower speaker would allow me to reach right up) Click image to enlarge drilled and tapped two hole for m5 bolts self tappers would probably have done Click image to enlarge I then fitted nuts to the bolts a belt and braces job, also drilled 6mm hole for wires Click image to enlarge cable ran to piggy back 2A fuse on AC circuit I fitted a 10mm tool clip using the existing screw on the washer pipe cover Click image to enlarge I'm pleased with the light and thanks again to jem90 for the inspiration Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge |
||
29th Mar 2020 11:57am |
|
gcc130 Member Since: 05 Jun 2015 Location: Wiltshire Posts: 735 |
Very neat👍
|
||
29th Mar 2020 12:55pm |
|
bugsaint Member Since: 07 Apr 2018 Location: Kent Posts: 9 |
Great idea to locate it on the pillar and the clip!
|
||
29th Mar 2020 1:07pm |
|
Jem_90 Member Since: 10 May 2019 Location: Oxon Posts: 54 |
That looks Great !!!
This community gives me so many ideas and inspiration. Red led's that's a nice touch, won't spoil your night vision. |
||
30th Mar 2020 3:35pm |
|
Zed Member Since: 07 Oct 2017 Location: In the woods Posts: 3245 |
Very tidy. Nice work. WARNING.
This post may contain sarcasm. |
||
30th Mar 2020 3:47pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis