DEFENDER2.NET - View topic - 2.2 Clutch Replacement : Must I remove the dpf

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > 2.2 Clutch Replacement : Must I remove the dpf

Page 1 of 1

Print this entire topic ·

Staftly

Member Since: 06 Jul 2012
Location: Lancashire
Posts: 55

2012 Defender 110 Puma 2.2 USW Orkney Grey

2.2 Clutch Replacement : Must I remove the dpf

Hi there.

I have a 2012 110 (2.2 version with DPF). Slave cylinder has gone, so box needs to come off (despite only 37k on clock and having had a new clutch under warranty at 18k). Plan to have the Ashcroft output shaft kit whilst doing this and a new clutch fix kit for good measure. Anyway, plan to do this on my drive using an engine crane through the front doors. Reading the manual it seems like the front pipe needs to come off, and this involves raising the engine in order to get it out.

Anyone have experience of changing the clutch on a 2.2 with DPF. Is it really necessary to remove the downpipe? Also, any good tips that might make the job easier are most welcome.

Thanks fellas

Steve

25th May 2019 2:30pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17360

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

I haven't done a 2.2, but can confirm that the front pipe has to come off on a 2.4 so I have no doubt the same is true on the former.

25th May 2019 2:35pm

Marks Landy

Member Since: 09 Feb 2015
Location: Cheshire
Posts: 299

How did you get on with the slave cylinder replacement?

8th Jan 2020 9:42pm

Staftly

Member Since: 06 Jul 2012
Location: Lancashire
Posts: 55

2.2 Clutch replacement

Marks Landy, here you go, I wrote up my experience of changing the clutch (cos of a knackered slave cylinder) on the 2.2 with a DPF.

https://www.defender2.net/forum/topic68329.html

My spigot bearing had collapsed, so had to be changed. That was the only PITA. Some come out easy, so not so. Other than that, take your time and you will be fine. I bought an engine crane to do the job. Since I didn't lift the engine to remove the pdf, I would use a gearbox trolley if I did it again rather than an engine crane.

Hope this helps.

Staftly

8th Jan 2020 10:37pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum