 | Home > Off Topic > 3D printing |
 
|
|
|
| NormanD Member Since: 12 Aug 2011 Location: Bristol Posts: 286   
|
If you want something to do view this thread, very impressive - http://www.rcgroups.com/forums/showthread.php?t=1918147 NormanD WE191
2015 110 XS Utility 2014 VW Caravelle 180 Executive |
||
23rd May 2016 7:40pm |
|
| Eduardo Member Since: 28 Aug 2008 Location: Región Metropolitana Posts: 2110  
|
Also I take the plunge...
Very happy and with a lot of ideas 
 Click image to enlarge Eduardo MY 2007 110 SW PUMA 2.4: Big Fog of 64' MY 1994 Jayco 1207 Folding camper: "El Tremendo" Click image to enlarge |
||
|
6th Dec 2016 12:34pm |
|
| JustFX Member Since: 10 Nov 2016 Location: Mendip Hills Posts: 190  
|
I am getting tempted by them now. Looking at a Creality3d one that does 500mm x 500mm x 500mm
I have some motorbikes and would love to make spare side panels and fairing stuff. Then to the Defender, brackets and adapters aplenty to be made. For example, an adapter to fit the dash camera to the back of the rearview mirror. Better adapter plate for my Ham Radio rig display unit. Just trying to work out if I really want to spend £450 on a gadget atm. ooh look Traxxis. |
||
|
24th Dec 2017 10:47pm |
|
| L90Andy Member Since: 29 May 2014 Location: Stratford-Upon-Avon Posts: 722 
|
It's the future
I've printed a phone holder, rear work light mounts and an interior lamp holder. All worked well. Plenty more ideas in the hopper  Instagram: L90andy
My 1984 Ninety: http://www.defender2.net/forum/topic56071.html - SOLD! My 2015 Defender: http://www.defender2.net/forum/topic39625.html - SOLD! |
||
|
17th Apr 2019 7:05pm |
|
| L90Andy Member Since: 29 May 2014 Location: Stratford-Upon-Avon Posts: 722
|
Oh and a speaker mounts and a hi-lift jack mount. Instagram: L90andy
My 1984 Ninety: http://www.defender2.net/forum/topic56071.html - SOLD! My 2015 Defender: http://www.defender2.net/forum/topic39625.html - SOLD! |
||
|
17th Apr 2019 7:06pm |
|
| diesel_jim Member Since: 13 Oct 2008 Location: hiding Posts: 6126 
|
Maybe that's how LR designed the intermediate shaft in the puma gearboxes, but just forgot to implement the final steel ones!
 |
||
|
17th Apr 2019 7:17pm |
|
| Zed Member Since: 07 Oct 2017 Location: In the woods Posts: 3348 
|
If you printed some b pillar plugs I'd buy a set.
|
||
|
17th Apr 2019 7:45pm |
|
| Sphere Member Since: 26 Apr 2013 Location: Midlands Posts: 725 
|
Am thinking of some trim clips - not sure how far we are with designs as he has only had it a week
|
||
|
17th Apr 2019 7:55pm |
|
| deep down Member Since: 02 May 2012 Location: France Posts: 204  
|
Have Prusa here, great bit of kit.
Just in the middle of this: https://www.prusaprinters.org/prints/41264-landy-mini-by-3d-sets then will move on to this one: https://www.3dsets.com/kategorie-produktu/...x4-lineup/ |
||
|
15th Jan 2021 5:11pm |
|
| Stacey007 Member Since: 25 Sep 2015 Location: Cheshire Posts: 3796
|
I've bought fancy models including resin ones for work but never used one myself...
until now. Ender 3 V3, you have to build it from a flat pack and is certainly wasn't plug and play, lots to learn abut speeds, bed temp, z axis, but I have managed to get it working 
already printing stuff for my Rock crawler and now I'm trying to build a mini trailer. Click image to enlarge |
||
|
15th Jan 2021 5:29pm |
|
| deep down Member Since: 02 May 2012 Location: France Posts: 204
|
Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge First LR print coming along, didn't have all the colours I wanted but an impatient 4 yr old doesn't care too much about that. Click image to enlarge |
||
|
18th Jan 2021 1:55pm |
|
| deep down Member Since: 02 May 2012 Location: France Posts: 204
|
Click image to enlarge Little print finished. Now on to the full RC version - Started with the gearbox Click image to enlarge Click image to enlarge Click image to enlarge |
||
|
5th Feb 2021 9:38am |
|
| SN Member Since: 29 Jun 2007 Location: SK6 Posts: 729 |
This is awesome, really like it!
Click image to enlarge I have a CEL Robox (and a 2021 Defender 110 on order) I've bought a 3D file for the 110
I'm planning a 3D print of it and its accessories (after I've designed them) Starting with 18" steelies Click image to enlarge Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history) |
||
|
5th Feb 2021 9:46am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
