 | Home > Technical > Recommend a breaker bar for Td5 stake nut please |
 
|
|
|
| ibexman Member Since: 13 Dec 2008 Location: Essex Posts: 2945  
|
As above cheers Chris
|
||
20th Mar 2019 10:21pm |
|
| ibexman Member Since: 13 Dec 2008 Location: Essex Posts: 2945
|
Strange I’ve heard nightmare stories about removing them 🤔
|
||
|
20th Mar 2019 11:33pm |
|
| Mash Member Since: 09 Feb 2015 Location: Guernsey Posts: 1674  
|
Assuming you are on about the stake nut on the axle I’ve always just used a 1/2dr socket on my impact gun, any good quality breaker bar would do just avoid the chinesium stuff from eBay
 90 wolf - Jasmin http://www.defender2.net/forum/topic39408.html
90 V8 - Maggie http://www.defender2.net/forum/topic42564.html 110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html 52HG25 lightweight https://www.defender2.net/forum/topic72342.html D3 Hse - Fiona Capri 2l S - Anna Think I might have a problem............ |
||
|
21st Mar 2019 12:58am |
|
| miker Member Since: 13 Sep 2015 Location: Surrey Posts: 1763 
|
I had no issues removing the axle but with my normal breaker bar, which I think is a Halfords advanced one
|
||
|
21st Mar 2019 1:01am |
|
| Fatbaron Member Since: 12 Mar 2016 Location: Devon Posts: 299
|
I always use scaffolding poles and keep a few different lengths in the workshop. Cheap and un-bendable!
|
||
|
21st Mar 2019 6:50am |
|
| blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17344 
|
Far from unbendable! Over the years I have bent many scaff tubes, albeit not on the Defender.
|
||
|
21st Mar 2019 7:43am |
|
| jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8006  
|
Halfords ones are as good as any for casual user. Cheers
James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
|
21st Mar 2019 7:55am |
|
| boxoftricks Member Since: 06 Feb 2019 Location: Home Counties Posts: 747 
|
I can vouch for the Halfords breaker bar. Worked fine on mine.
|
||
|
21st Mar 2019 9:54am |
|
| hank Member Since: 12 Sep 2016 Location: South Wales Posts: 2292 
|
I too can vouch for the halfords 1/2" drive. Found one at the side of the road probably 15 years ago. It's done everything I've thrown at it, including leveraging a 4ft scaffold extension. Did the axle stake nuts with it six months or so back too no problem > 110 XS Double Cab
|
||
|
21st Mar 2019 9:57am |
|
| ibexman Member Since: 13 Dec 2008 Location: Essex Posts: 2945
|
Thanks fellas 👍
|
||
|
21st Mar 2019 10:19am |
|
| X4SKP Member Since: 29 Nov 2013 Location: Berkshire Posts: 2295 
|
Halfords Professional Breaker Bar 24" 1/2" Drive £28
Purchased to use in conjunction with 52mm Wheel Bearing Stake Nut Socket A 2M length on Key Clamp Scaffoldoing was used over the top of this to break them loose, at 210 Nm / 150lbf.ft...man they are tight 
Basic Bar on its own is a good one...seems up to the jobs asked of it...
 Click image to enlarge SKIP https://www.defender2.net/forum/topic83242.html |
||
|
2nd Apr 2019 8:56am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
