• Forum
• Gallery
• Shop
• Sponsors

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Engine Hoist.

Page 1 of 2 1 2 >

Print this entire topic ·

L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10751	Engine Hoist. Hi all I'm hoping that next year i can finally make a start on my project so i will need an engine hoist and as there are quite a few out there, i have not got a clue which are good and no good, so what do you use or could recommend to me, many thanks in advance  1996 Golf Blue 300Tdi 110 Pick up. Keeper. Clayton.
2nd Nov 2018 8:51pm

NickMc Member Since: 01 Oct 2014 Location: Norn Iron Posts: 1624

2 ton, folding legs, four casters on the thing so you can wheel it when the legs are up. 1 ton version aren’t any good for a Land Rover as when the boom is out it won’t take the weight and it’s not long enough to reach in the engine bay. I’d buy sealey as you can always get spares and the “Yankee” hydraulics are decent- avoid draper- I’ve had three hydraulic presses now by them under warranty. They won’t work on anything that’s not flat concrete, without being very sketchy. Last edited by NickMc on 2nd Nov 2018 9:29pm. Edited 1 time in total

2nd Nov 2018 9:21pm

Litch Member Since: 10 Mar 2013 Location: Oxfordshire Posts: 762

I bought an SGS 2-ton model a couple of years ago and haven't been disappointed. I have no doubt it is exactly the same as the unbranded ones out there just with a nice black paint-job and SGS stickers but they give a 2-year warranty and the confidence of spares backup (if needed). Very heavy and still quite bulky even when folded but it has the additional lifting capacity and (more important to me) additional height & reach which is handy when everything is done singlehanded. Also bought a load leveller which has come in very handy. ONE LIFE, GET IT!

2nd Nov 2018 9:27pm

L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10751	Thank you both of you  1996 Golf Blue 300Tdi 110 Pick up. Keeper. Clayton.
2nd Nov 2018 10:05pm

John P Member Since: 26 Dec 2013 Location: West Sussex Posts: 317	I bought a Machinemart folding crane, and as a DIY has served me well on a few builds. https://www.machinemart.co.uk/p/cfc100-1-t...hop-crane/
2nd Nov 2018 10:08pm

L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10751	Thanks for the link John P  1996 Golf Blue 300Tdi 110 Pick up. Keeper. Clayton.
2nd Nov 2018 10:25pm

John P Member Since: 26 Dec 2013 Location: West Sussex Posts: 317	Actually I’ve just had a thought. I’ve rebuilt so many engines I’ve forgotten what I used when. The link above was used on my sports cars which are a lot lower. I probably used my over head old fashion chain block and tackle on the LR.
2nd Nov 2018 10:31pm

NickMc Member Since: 01 Oct 2014 Location: Norn Iron Posts: 1624	I’ve had a my sealey PH20 for maybe 12 years now and it’s had hard commercial use, only had to replace a wheel (my fault). Spend the little extra on the 2 ton model. They come up of offer every year and you can pick them up new for about £250
2nd Nov 2018 10:32pm

L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10751	John P ---- I have got a chain block and tackle but the wooden structure is not man enough to take the weight so hence the engine hoist  1996 Golf Blue 300Tdi 110 Pick up. Keeper. Clayton.
2nd Nov 2018 10:36pm

L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10751	Thanks NickMc, i will keep an eye out for any offer's going  1996 Golf Blue 300Tdi 110 Pick up. Keeper. Clayton.
2nd Nov 2018 10:39pm

blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17378	Works for me!
2nd Nov 2018 10:41pm

NickMc Member Since: 01 Oct 2014 Location: Norn Iron Posts: 1624	Show off! I tend to find a forklift is the lazy option: Click image to enlarge
2nd Nov 2018 10:45pm

Grenadier Member Since: 23 Jul 2014 Location: The foot of Mont Blanc... Posts: 5808	Don't you find firing up, driving over and positioning the forklift a bit of a hassle? I just lift the engine out...  Monsieur Le Grenadier I've not been everywhere, but it's on my list..... 2011 Puma 110DC - Corris Grey
3rd Nov 2018 1:26pm

shropshiredefender Member Since: 05 Jun 2017 Location: Shropshire Posts: 834	Way to go dude!
3rd Nov 2018 1:30pm

NickMc Member Since: 01 Oct 2014 Location: Norn Iron Posts: 1624	It’s a bit hard with the Tdcis with only one lifting eye
3rd Nov 2018 3:07pm

Page 1 of 2 1 2 >

All times are GMT Jump to  Select a forum General Technical Maintenance & Modifications In Car Electronics Wheels & Tyres Tdi V8 Td5 Puma (Tdci) 130 Defender Celebration Series & Classic Works Series Land Rovers My Defender Spotted Events Pictures & Video Expedition & Overland Camping, Caravanning and Holidays Land Rover Customer Relations General & Technical (L663) Orders 2021MY (L663) Orders 2022MY (L663) Orders 2023/24MY (L663) Orders 2025MY Faults & Fixes (L663) Wheels & Tyres (L663) In Car Electronics (L663) My New Defender (L663) Modifications & Maintenance (L663) P400e Area (L663) V8 P525 Area (L663) Pictures & Video (L663) INEOS Grenadier Europe Australia & New Zealand Africa North America & Canada For Sale & Wanted For Sale & Wanted (L663) eBay & Bargain Spots Group Buys Dealership & Sponsor Feedback Finance & Insurance Stolen A-Plan Insurance Advanced Factors CSK Land Rovers Duckworth Parts Empire Tuning Other Site Sponsors Site News & Feedback Off Topic

<  Previous Topic | Next Topic >

Posting Rules You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum

Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis