DEFENDER2.NET - View topic - Which exhaust do I have?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Which exhaust do I have?

Page 1 of 1

Print this entire topic ·

mini Anaconda

Member Since: 23 Aug 2016
Location: Thames Valley
Posts: 784

Which exhaust do I have?

I have a 1989 Ninety which has the engine from a Disco 200tdi. The rear section of the exhaust is rapidly turning to dust and needs replacing, from the pictures can anyone identify which exhaust it is? There is no silencer on it and the pipe doesn't appear to have been bodged from what I can see.

Any ideas?

Click image to enlarge

Click image to enlarge

Many thanks

BORG - Bucks & Oxon 4x4 Response Group

24th Jun 2018 12:42pm

Devon-Rover

Member Since: 22 Jan 2015
Location: South Devon
Posts: 917

2014 Defender 110 Puma 2.2 USW Aintree Green

I would hazard a guess at an ESR4527 with the flange cut off and two slits stuck into to act as a clamped arrangement and maybe a little trimmed off the other end to keep in tidy without sticking too far out. Also can be found on Fb, Ytube, Insta & Twitter @4WDSouthwest

24th Jun 2018 4:22pm

jst

Member Since: 14 Jan 2008
Location: Taunton
Posts: 8063

2011 Defender 110 Puma 2.4 USW Stornoway Grey

2.5 petrol? Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop

24th Jun 2018 6:15pm

mini Anaconda

Member Since: 23 Aug 2016
Location: Thames Valley
Posts: 784

Thanks guys... it looks like it is ESR4527 with the end cut off. I have ordered one and will report back when I fit it! BORG - Bucks & Oxon 4x4 Response Group

25th Jun 2018 12:51pm

mini Anaconda

Member Since: 23 Aug 2016
Location: Thames Valley
Posts: 784

Devon-Rover wrote:
I would hazard a guess at an ESR4527 with the flange cut off and two slits stuck into to act as a clamped arrangement and maybe a little trimmed off the other end to keep in tidy without sticking too far out.

Bit of a late reply but you were spot on with your advise, thanks.

BORG - Bucks & Oxon 4x4 Response Group

9th Sep 2018 7:11pm

Maxxed_Ross

Member Since: 06 Jun 2012
Location: Bathgate / North Sea
Posts: 340

that's handy to know, as that's the same rear section as I currently have with the same issues you did

I thought I was going to be forced down the expensive custom route to get the side exit back where I wanted it again

2013 Discovery 4 HSE Lux | 2001 Defender 90 TD5 | 2007 Prodrive RB320

9th Sep 2018 7:20pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum