 | Home > Puma (Tdci) > Spigot bearing help |
 
|
|
|
| zsd-puma Member Since: 09 Aug 2016 Location: Kent Posts: 2720   
|
'Warm' the end of the crank with a blow torch, I say warm because you don't want the thing glowing red hot.
I assume you have a blind bearing puller? Some good tips here; http://fordtransit.org/forum/viewtopic.php?f=5&t=156612 |
||
13th Apr 2018 7:21pm |
|
| ian series 1 Member Since: 17 Nov 2014 Location: south Posts: 3127 
|
Drill a hole in it, there is a void between it and the crankshaft,
Either use a slide hammer to pull it out, Or you can drill a hole to accept a grease nipple and force it out with grease. I did one a while ago, and did post my findings, they are an absolute  to remove!
http://www.defender2.net/forum/topic51595....ng+removal Good luck  80" 80" 86" 88" 90"
Wanted, Forward Control Anything considered. |
||
|
13th Apr 2018 7:29pm |
|
| NickMc Member Since: 01 Oct 2014 Location: Norn Iron Posts: 1624  
|
There’s a special tool for removing them around £60. You have to shatter the center and then insert the puller.
|
||
|
17th Apr 2018 7:18pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
