DEFENDER2.NET - View topic - Alternator B+ stud. (With pictures.)

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Alternator B+ stud. (With pictures.)

Page 1 of 1

Print this entire topic ·

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20729

Alternator B+ stud. (With pictures.)

Today I had to do a little work on mine adding my third and final power feed directly Alternator fed.

Whilst I was at it I took some pics for those of you who are interested. Mine is a Puma and the Torque for the nut is 8NM.

However, I couldn't get my torque wrench on it, so long as you don't over tighten you will be fine.

Access is easier with the hose in the vicinity took off, pulled to the side and a glove over it to keep the inside clean.

It's also worth checking, that the hose once refitted is all the way up and there's is no rubbing on the steering column underneath.

This is worthwhile checking regardless.

Here is the hose removed (just behind airbox pipe):

Click image to enlarge

The Alternator B+ stud views from below:

Click image to enlarge
The alternator stud viewed from drivers side wing area.
It has a plastic / rubber cap on it, that just pulls on or off, obviously here I removed it and also a stray ring terminal I had not yet put on.

Click image to enlarge

It goes without saying, make sure you disconnect the battery before doing any work on it.
And any connections made should be fused in-line.

I have my headlights, and two light bars directly fed from mine.

I thought this thread maybe useful to others for winch installs, spotlights / light bars and headlight looms etc.

WeWillWin🇬🇧🇺🇸
⛽️🛢️⚙️🧰💪

Last edited by custom90 on 12th Jan 2018 7:03pm. Edited 1 time in total

30th Dec 2017 5:45pm

Thon

Member Since: 22 Nov 2015
Location: Salisbury Plain
Posts: 696

Thank you Steve - that's very helpful as I am about to install a relayed headlamp loom myself.

Of course I now wish i'd done it when I was fitting the new Nugget air intake piping but isn't that always the way.

Top Man!

30th Dec 2017 5:55pm

Screbble

Member Since: 26 Apr 2015
Location: Lancashire
Posts: 2164

2004 Defender 90 Td5 XS CSW Zambezi Silver

Really helpful Steve

Thanks for posting.

Certainly the right way to do things Steve

31st Dec 2017 10:38am

Harryb450

Member Since: 11 Dec 2011
Location: over yonder
Posts: 283

2011 Defender 110 Puma 2.4 USW Santorini Black

Nice work 👍🏻 Just awaiting the delivery of my landreiziger loom 👌🏻 NO ROAD..........EXCEPT FOR LANDROVER

31st Dec 2017 12:05pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20729

Doing a bit more today, finishing off fitting in my main power feed I had company turn up.

Click image to enlarge WeWillWin🇬🇧🇺🇸
⛽️🛢️⚙️🧰💪

31st Dec 2017 1:38pm

Screbble

Member Since: 26 Apr 2015
Location: Lancashire
Posts: 2164

That's your lunch sorted then

31st Dec 2017 1:45pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum