↓ Advertise on Defender2 ↓

Home > Series Land Rovers > Clutch slave cylinder
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Bobbyg



Member Since: 05 Jan 2017
Location: Yorkshire
Posts: 26
England 1987 Defender 90 2.5 n/a Diesel PU Orkney Grey
Clutch slave cylinder
.my hybrid 88 coiler that I,m sorting out.had the flex hose to the slave cylinder fixed to bulkhead.the a pigtail loop to the slave cylinder in copper pipe.i removed the bracket from the bulkhead and back to the top mounting bolt of the slave cylinder .only to find its around 50 mm short.my only option as I see it is to make a longer bracket to bring the copper pipe closer to the bulkhead mounting of the flex hose.any other ideas I'e a longer flex hose or some braided hose kit.
Post #653057 26th Sep 2017 9:44pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums