 | Home > My Defender > An Anoraks Tdi Defender 90 |
 
|
|
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324  
|
Thanks folks. Looking forward to using it next weekend, rather than just working on it. Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
5th Jun 2017 7:30am |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
It's been a hell of a week! Dunsfold, last weekend, was excellent as always with more Land Rovers than you can shake a stick at. On the way home, however, I suffered a puncture less than a mile from home. My Avon Rangemasters are tubed tyres, so I heard the bang and it was on the rim in seconds. I was just on the approach to a roundabout, so had to continue for about 50 yards to get somewhere safe.
 Click image to enlarge No obvious cause but the tyre was trashed. The only saving grace was that I was carrying my newly assembled jack kit! I hadn't been carrying one at all until last weekend 
Click image to enlarge The good news was that a quick browse of eBay let me pick up a virtually new replacement on a rim: Click image to enlarge On Monday after work, I set off to collect two new front doors from a breaker just north of Reading that I'd used before. The doors really are new, taken off a chassis cab that was destined to become an armoured vehicle, and are complete with all of the trim and other fittings: Click image to enlarge Click image to enlarge The breaker even allowed me to trade in a passenger door that I'd bought from him a few months earlier. Unfortunately though, I came home to this: Click image to enlarge I've no idea how this happened. I reported it to the police as criminal damage but it is extremely odd. There was no sign of the door being opened and nothing was missing. I don't even think entry had been attempted because as soon as I tried the glass just fell out of the frame. Anyway, it was a bloody nuisance and a real pain to clean up - broken glass gets everywhere! That little incident forced my hand about what to tackle next. It wasn't my intention to launch straight into swapping doors as I need to paint them and I've got other priorities, but there was no point trying to replace the glass in the existing door. Consequently, some of this week has been spent stripping the new drivers' door of its' furniture and fittings and then today, prepping and painting it. Prepping has included sanding down the existing finish with a random orbit sander, masking all the bits that are not to be painted, grey primer, flatting with 800 grit wet and dry, and then brush painting with coach enamel (I did spray some of the fiddly bits with a rattle can): Click image to enlarge Click image to enlarge I suspect that the coach enamel will also need flatting off and a second coat but I'm not sure if I'll get that done this evening - depends how quickly the paint dries, although the 30 degree heat is helping! If I do get the painting finished today then I hope to fit it tomorrow. Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
17th Jun 2017 4:15pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5161
|
I recon some fanny was disturbed when they did that, hence why they didn't get any further.
It will look the part once those doors are fitted ,shame we don't have a breaker as such like that up here. Id be buying some odds and sods for mine! Defender TD5 90 ---/--- Peugeot 306 HDI hatch back Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
17th Jun 2017 6:27pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5161
|
I recon some fanny was disturbed when they did that, hence why they didn't get any further.
It will look the part once those doors are fitted ,shame we don't have a breaker as such like that up here. Id be buying some odds and sods for mine! Defender TD5 90 ---/--- Peugeot 306 HDI hatch back Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
17th Jun 2017 6:28pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
Maybe. I live at the end of quiet cul-de-sac and the 90 isn't easily visible form the road though, so it's all a bit strange.
The door had dried really quickly so it's now had its' second coat of paint. Looking good for tomorrow  Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
17th Jun 2017 7:07pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5161
|
don't kid your self on that mind, we live on a main road with no trouble etc, Though we have CCTV, for my dads caravan. They still had a go at my little metro, that car had no ICE at all. If it wasn't for the cut off switch system I had in place at the time, they would they may have got the car. They had bent the door back and unlocked it, nothing was stolen though. So either they clocked the cameras and done one or realised that the car didn't have a fancy radio system in.
I had removed that and put in a RIO radio dash blank in, if they had got away with the car, I can tell you this LandRoverAnorak, it would have killed them.  It was one tooled up car and it would have had you if you took the  out of it. 160bhp in a tin can raises hell.  Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
17th Jun 2017 11:46pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
The heat last weekend put me off doing anything significant but today was the big day for the new drivers door.
One thing that caught me out whilst re-assembling the door was the door handles. I'd forgotten that the later ones are different to accommodate the 'single key' locks. Fortunately, I had a new spare old style handle to hand and a set of new locks that it was always my intention to fit with new doors. With the new handle bolted in place, I took the opportunity to add some more sound deadening before sealing up the innards again: Click image to enlarge Then, the new style foam water shedder was re-fitted: Click image to enlarge With the help of my darling wife, the new door was offered up to the hinges (which had already been renewed) and bolted on with new stainless bolts, after which the door card was re-fitted: Click image to enlarge When putting it all back together, I'd re-fitted the seal to the lower edge of the door, but I had to take it off again as it wouldn't allow the door to shut. I'll have to re-visit that another time. With the door on the hinges, I had to make a few adjustments to get it to line up, including reducing the shimming behind the latch: Click image to enlarge It now shuts easily with a very satisfying thunk 
And the finished result. As suspected, the new paintwork, despite being brushed, is better than the rest of the vehicle! Something else that'll have to be attended to in due course 
Click image to enlarge Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
24th Jun 2017 5:20pm |
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10742 
|
Good looking job there LRA, nice lines on the door, good fit
 1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
|
25th Jun 2017 8:28pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
Thanks
Spent some of today stripping out old seat belts and lining from the rear tub. Two out of four lap belts removed and two out of four bolts that needed to be hack sawed off
Stripped out most of what I think is stable matting that had been glued to the floor and wheel boxes and then spent ages with a scraper trying to remove the glue and various detritus that had built up under the matts. It's all going to get covered with Silentcoat but the remnants of the old glue are less than ideal. Anybody know a way to remove what I think is a latex type glue? Click image to enlarge Next job is to position and drill holes for two new individual side facing seat and new lap belts before Silentcoat and carpet. Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
25th Jun 2017 9:37pm |
|
| trickster5000 Member Since: 12 Dec 2015 Location: East Yorkshire Posts: 502 
|
I'll be watching with extra interest then as I have thought about fitting 2 Td5 fold up seats instead of the bench seats so I could fit a barebox storage chest up against the bulkhead. The td5 seats also have the added benefit of safety with lap belts and they're more comfortable than the bench seats which you sort of have to perch/squat on.
Waaay down the list though as I priced it up at over £400 for 2 seats and the storage box. Looking forward to seeing how you get on! Matt.
'89 90 CSW with a 3.5 V8 conversion (WIP) - http://www.defender2.net/forum/topic46809.html |
||
|
25th Jun 2017 9:50pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
I was very lucky in that I picked up a couple of virtually new seats for only £45. They're going to go near the back with space for 'stuff' in front of them. I might even go the Barebox route although I'm in two minds about fixed storage. Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
25th Jun 2017 9:55pm |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769 
|
Just a thought on removing the bottom seal on the new door. Did you have the seal on the sill at the same time as the door one? If so you only need one, either the door or sill seal. Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
|
25th Jun 2017 10:05pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
Yeah, I did wonder if that was the case. Unfortunately, the fixings for the original sill-mounted seals are completely rusted so I'll leave it as it is for now. I also suspect that the sill rails themselves are shot and will need replacing. When I tackle that particular job I'll change it to suit the newer door-mounted seals. Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
26th Jun 2017 6:35am |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5161
|
looking great there LRA, I think the paint on defenders is poor anyway so I think any DIY job will be better. The factory paint job looks well thin to me. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
30th Jun 2017 7:49pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
