DEFENDER2.NET - View topic - Jacking up axle with diff guard fitted

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Jacking up axle with diff guard fitted

Page 1 of 1

Print this entire topic ·

Simon27

Member Since: 30 Oct 2012
Location: East Lothian
Posts: 131

Jacking up axle with diff guard fitted

So I have wrap around diff guards fitted on the front a rear.

Normally, you can lift the vehicle with a jack under the diff bump, but is this safe to do with a diff guard fitted? Could it take the load? There's not much space on the drivers side to get a jack and axle stand in.

I'm leaning towards a no but wanted to check.

10th Oct 2016 8:37pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20620

I wouldn't risk it, they are designed for limited impact and not weight / load.
Sound like a situation where you could do with a hi lift to then carefully put axle stand under.
If you need the axle to lift with the body and chassis then before jacking use a ratchet strap.
I assume this is the issue your having? TheThunder Rolls🇬🇧🇺🇸
⛽️🛢️⚙️🧰💪

Last edited by custom90 on 10th Oct 2016 10:16pm. Edited 1 time in total

10th Oct 2016 8:45pm

Devon-Rover

Member Since: 22 Jan 2015
Location: South Devon
Posts: 923

2014 Defender 110 Puma 2.2 USW Aintree Green

What brand do you have?

I have been putting jacks under the QT / Wildbear diff guards for years with no i'll effects. They are that well designed to cope with it.

10th Oct 2016 9:08pm

couplands

Member Since: 31 Aug 2011
Location: Peak District & Cornwall
Posts: 1826

custom90steve wrote:
I wouldn't risk it, they are designed for limited impact and not weight / load.
Sound like a situation where you could do with a hi lift to then carefully put axle stand under.
If you need the axle to lift with the body and chassis then before jacking use a rat he does strap.
I assume this is the issue your having?

I have put the jack under my QT diff guards with no problems. I'd hope the guards are stronger than the diff they are protecting otherwise I would take them off.

Cheers

Simon

10th Oct 2016 9:15pm

Simon27

Member Since: 30 Oct 2012
Location: East Lothian
Posts: 131

Not sure of the brand - they came from the big stall at Peterborough last year which was all suspensions struts, chequer plate, diff and steering guards.

The steel is very thick, especially when looked at next to the metal my 3 ton trolley jack is made of so I did always wonder if it was doable. I'm never lifting it too high and always then lower onto axle stands before working on anything.

10th Oct 2016 9:48pm

davew

Member Since: 02 Jan 2012
Location: North Yorkshire
Posts: 888

1990 Defender 90 V8 Petrol PU Auto Rioja Red

I normally try to avoid using the diff as a jacking point, preferring the suspension mounting points. It's too easy on a normal diff, without a guard, to damage the very thin diff cover and it's not really a stable jacking point.

That said, if a diff guard isn't strong enough to jack the vehicle up then it needs binning, in "normal" use a diff guard may well end up taking the weight of the vehicle when it's doing it's job. http://www.yorkshireoffroadclub.net/

10th Oct 2016 10:06pm

Scoobeenut

Member Since: 04 Mar 2015
Location: West London
Posts: 310

2010 Defender 90 Puma 2.4 SW Santorini Black

I use a Sealey cross beam adapter on my trolley jack, this makes sure you are lifting evenly across the axle and avoiding the diff guard. https://www.bodyshop-tools-supplies.co.uk/...0wod4OwJpQ

11th Oct 2016 11:47am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum