Home > Off Topic > clear "bra" |
|
|
Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2637 |
Has anybody any experience with this?
just picked up a 1 year old audi with very low miles, its absolutely mint and would like to keep it that way, have got tape for the sills and the rear door but fancying clear bra for the front end.. basically any do's / dont's? guess 3m is the stuff to use.. what kind of price am i looking at? was going to give it a go myself but could only find huge sheets of the 3m stuff which were £700+ |
||
4th Jul 2016 10:39pm |
|
williamthedog Member Since: 29 Dec 2012 Location: south wales Posts: 3441 |
Thought I would be looking at something different when I clicked on this
|
||
5th Jul 2016 5:28am |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6295 |
try here?
http://www.armourfend.co.uk/armourfend-for-cars or you could try this for the cost - http://www.invisiblepatterns.co.uk/shop/To...sheet.html it's a bit early in the morning.....there's a '0' missing in the one above....I thought it was 1000x1000 |
||
5th Jul 2016 6:32am |
|
mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769 |
Look up helicopter tape on eBay, it usually throws up different sizes and then cut it to fit. Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
5th Jul 2016 8:32am |
|
mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769 |
Like this
eBay Item No. 291638798405 Ray My build thread http://www.defender2.net/forum/topic17615.html |
||
5th Jul 2016 8:34am |
|
Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2637 |
I'm well adversed in using helicopter tape, done the defender sills with it, and many bikes i think for a car of this nature having it done properly would yield better results..
i struggled to find large sheets of it on eBay apart from stateside.. this is what I'm after.. |
||
5th Jul 2016 9:22am |
|
JOW240725 Member Since: 04 May 2015 Location: Suffolk Posts: 7904 |
Likewise disappointment with the actual thread topic...
After Lamberts experience of googling, I'm not sure I dare actually google Bra to see what it actually is!! James MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641 MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557 Instagram @suffolk_rovers |
||
5th Jul 2016 9:53am |
|
Hairy Dan Member Since: 25 Apr 2013 Location: NW Durham Posts: 1412 |
THere is a guy in Newcastle who uses VentureShield Paint Protection Film, he used to do kits or he would fit it for you.
http://www.customcoats.co.uk/ Cheers Ian -------------------- 22MY Defender 110 D200 SE, Fuji White. Kielder 4x4 Safari Instagram @defender_v8 |
||
5th Jul 2016 11:24am |
|
Green Machine Member Since: 19 Nov 2010 Location: North Yorkshire Posts: 1226 |
This is the 3M Ventureshield stuff:
http://www.3mventureshield.co.uk/paint-protection-film/ I briefly looked into it when I got a new Audi a couple of years ago, but in the end decided against. The reason for me was from all of the pictures I found online I could always see the 'edge' of the film, which I didn't like. I also decided it would be sods law that you spend a fair bit of money getting the front end wrapped and protected and then get a scratch down the side or something. But it does seem to get good reviews both in quality of fit (depending on who fits it!) and that it does work in preventing stone chips. 2005 Td5 | 90 Station Wagon | Tonga Green |
||
5th Jul 2016 12:40pm |
|
Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2637 |
contacted and going for a quote tomorrow afternoon hopefully cheers. the other 2 i contacted in the area haven't replied also green, we do have one car with it already but it was a factory option and its absolutely perfect, you cant notice from more than 30cm away... |
||
5th Jul 2016 1:44pm |
|
Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5012 |
Useful thread, thanks also...
I took the protective stuff off my SAABS 9000 Aero flared rear wheel arches that SAAB put on from new as it was faded and pitted after 20 years and I have been meaning to replace it... Better... It,s also on the body kit underneath just in shot, will replace that also, need to make a template first, sod to get off, well stuck on after so many years... Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
5th Jul 2016 1:56pm |
|
Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2637 |
this is my defender sill and the back end of the other car, the other car is inside so the lighting makes it stand out more... both have been on for over 3 years.
Click image to enlarge Click image to enlarge (pic reminds me i need to glue the end cap back on ) i did the defender sill and the blue car is factory fit... |
||
5th Jul 2016 2:32pm |
|
Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2637 |
been quoted £550 one place and £2.4k at another (you'd think it would be a full wrap at that price... it wasn't...)
|
||
6th Jul 2016 9:33pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis