DEFENDER2.NET - View topic - Brake bleeding, corroded?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Brake bleeding, corroded?

Page 1 of 1

Print this entire topic ·

tobz102

Member Since: 07 Feb 2014
Location: Atherstone
Posts: 134

2008 Defender 90 Puma 2.4 HT Stornoway Grey

Brake bleeding, corroded?

been a couple of years since had the brake fluid changed on the tdci so thought whilst it's in having it's clutch done, will ask the indie to do it.

Reports back that the rear bleed nipples are corroded solid into the caliper...would probably require new calipers to remove them.

So for now I've left it but i'm curious as to if there's any other way of replacing fluid/bleeding without needing to remove the bleed screws? I had it done by a main dealer maybe 2-3 years ago and there was no problem. I can't imagine that in 2 years they've become corroded in solid.

In the workshop manual it's quoted that 'purpose built pressure bleed/refill equipment is suitable for use', does this not require access to the caliper bleed nipples? If so i'll take it along to a stealer to be done, save spending money on calipers

9th May 2016 2:33pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17336

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

Bleeding must be done via the bleed nipples, since they are located at the highest point on the calipers.

I have on one occasion many years ago emergency bled brakes by slackening the pipe union on the caliper, but (a) this won't usually bleed the caliper itself so you may well have a spngey pedal and (b) is usually a problem since if the nipples are corroded, then generally so too is the pipe.

It is rare that a bleed nipple is so corroded that it cannot be removed, but not unheard of. If it will come out, a new nipple can be fitted. If it really won't come out, you need new calipers.

9th May 2016 4:07pm

Eau02467

Member Since: 20 May 2015
Location: Glasgow
Posts: 48

Soak in wd40 every day for a week then use a socket not a spanner to remove. Once out clean the hole with a tap and replace with a new nipple

9th May 2016 4:39pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17336

Use a 6-point socket rather than a 12, too.

9th May 2016 5:17pm

jimbob7

Member Since: 06 Jul 2013
Location: uk
Posts: 2055

Time to change garage if they can't loosen bleed nipples on brake calipers that were only installed 35 years ago!! Pov.spec,ftw. 2006, 110,TD5.

9th May 2016 6:49pm

tobz102

Member Since: 07 Feb 2014
Location: Atherstone
Posts: 134

Thanks for response I'll work on it this week.

Appreciate it looks bad by the mechanic, but tbf to the guy the car had been in for a new clutch and he was aware I wanted it back asap and also had spent a large amount of money on labour already.
I'm sure he was capable of removing but to get it back for the weekend didn't.

9th May 2016 7:38pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum